|
|
 |
Match Barrels & Parts |
|
Mags & Mag Accessories |
|
|
Frame Components |
|
Guide Rods, Plugs & Buffers | |
|
|
Springs |
|
Mainspring Housings & Maxi-Wells | |
|
|
Safeties |
|
Slide Components & Sights |
|
|
|
 Factory firing pins are often weak and subject to failure. These top quality firing pins are
precision turned from heat-treated tool steel. Proper weight for positive ignition with heavy
duty springs and any type primer. Usable with all 1911 type pistols including Colt Series
80 and 70. Springfield 38 Super and 9mm slides use the oversize diameter pin for heavy
loads. At present we are the only manufacturer making the correct size pin for theSpringfield 38 Super slides. All Ed Brown, Baer and newer Caspian slides use the 38 Super firing pin, Part #825. If you are unsure which pin you need, measure the diameter near the tip where the pin strikes the primer and compare to the listings. |
| EB824 | Firing Pin, .45 ACP | $13.95 | |
| EB825 | Firing Pin, 10mm, .38/9mm, .45 Baer | $13.95 | |
| EB826 | Firing Pin, 9mm/.38 Springfield | $13.95 | |
|
|
 A high tolerance heat treated alloy steel firing pin stop for all 1911 pistol types. Made to
max tolerance on width for a snug fit with the extractor. For Series 70 guns, but may be
easily modified for Series 80.
|
| EB820 | Firing Pin Stop, Blue | $21.95 | |
| EB820-S | Firing Pin Stop, Stainless | $23.95 | |
|
|
 One thing you will need for sure in building a reliable pistol is an extended ejector. Essential
insurance against failed ejection. Made from heat treated 4140 alloy steel. Requires
minor fitting.
|
| EB1305 | Extended Ejector, .45 ACP, Blue | $46.95 | |
| EB1306 | Extended Ejector, .38 Super, Blue | $49.95 | |
|
|
 One of the most common causes of malfunction in the 1911 pistol is a poor extractor.
Install one of these and eliminate feeding/extraction problems before they start. Fully
machined from aircraft quality heat-treated 4340 alloy steel bar stock for long wear and
extra strength.
|
| EB1301 | Extractor, 70 Series, .45 ACP | $52.95 | |
| EB1302 | Extractor, 80 Series, .45 ACP | $53.95 | |
| EB1303 | Extractor, 70 Series, .38 Super / 9mm | $53.95 | |
| EB1304 | Extractor, 80 Series, .38 Super / 9mm | $56.95 | |
|
|
 We
have a complete line of standard swage-on front sights for standard 1911 type guns as well as the
newer Colt pistols with the wide tenon width. Machined from solid bar stock. Styles include
a target type post and a carry type ramp in both plain black and white dot. Gunsmith fitting
is required.
|
| EB1601 | Front Sight, Modified Ramp, Narrow Tenon | $21.95 | |
| EB1611 | Front Sight, Modified Ramp, Narrow Tenon, White Dot | $25.95 | |
| EB1612 | Front Sight, Modified Ramp, Wide Tenon, White Dot | $25.95 | |
| EB1613 | Front Sight, Post, Narrow Tenon, White Dot | $21.95 | |
| EB1604 | Front Sight, Post, Wide Tenon | $21.95 | |
|
|
|
Copyright © 1999-2009 www.GunAccessories.com All Rights
Reserved. |
|
