|
|
|
 Bushing wrench with two screwdriver tips, wire stripper, and bottle opener. Will hang on your key chain.
Made of 416 heat treated Stainless, beautifully finished and polished. A must for every .45 shooter.
|
|
| K401 | Combo Tool, Stainless Steel | $23.95 | |
|
|
|
|
|
| K402 | Arsenal Type Staking Tool | $26.95 | |
|
|
 For all target type bushings, including Colt
collets and comps. A must for easy removal of tight fitting bushings
|
|
| K403 | Bushing Wrench, Standard Model | $5.95 | |
|
|
 Specially
designed for Kings Officer's Model Bushings.
|
|
| K403OM | Bushing Wrench for Kings Officer's Model Bushings | $5.95 | |
|
|
 Replace your wide slotted burred grip screws with our narrow slot screws. Machined out of 416 stainless or 4140, then heat treated to prevent burring.
Greatly improves appearance.
|
|
| K309-B | Narrow Slot Grip Screw Set (4), Government, Blue Steel | $11.95 | |
| K309-S | Narrow Slot Grip Screw Set (4), Government, Stainless Steel | $11.95 | |
| K309-BE | Narrow Slot Grip Screw (1), Government, Blue Steel | $2.95 | |
| K309-SE | Narrow Slot Grip Screw (1), Government, Stainless Steel | $2.95 | |
|
|
 Replace your wide slotted burred grip screws with our
with our high-tech Allen Grip Screws in 4140 heat treated Blue or 416 heat treated stainless.
|
|
| K312-B | Allen Head Grip Screw Set (4), Government, Blue Steel | $11.95 | |
| K312-S | Allen Head Grip Screw Set (4), Government, Stainless Steel | $13.95 | |
| K312-POB | Allen Head Grip Screw Set (4), Para-Ordnance, Blue Steel | $11.95 | |
| K312-POS | Allen Head Grip Screw Set (4), Para-Ordnance, Stainless Steel | $13.95 | |
| K312-BE | Allen Head Grip Screw (1), Government, Blue Steel | $3.95 | |
| K312-SE | Allen Head Grip Screw (1), Government, Stainless Steel | $3.95 | |
|
|
 Fits Colt Autos and variations. Releases the magazine without shifting your grip. Easy to install by drilling
and tapping one hole. Knurled surface finish.
|
|
| K310-B | Extended Mag Release Button, Blue Steel | $20.95 | |
| K310-S | Extended Mag Release Button, Stainless Steel | $20.95 | |
|
|
 This set is for Colt and various 1911 series pistols. It includes 3 recoils springs, 11, 14, and 18-1/2 lbs., plus one
heavy-duty firing pin spring. Replacing these springs may solve many functioning problems when using reduced target ammunition loads,
particularly in pistols with increased slide weight. Benefits include reduced batter load values.
|
|
| K313 | Recoil Spring Set, 3 Recoil Springs + Firing Pin Spring | $12.95 | |
|
|
 For
standard or extended mag release.
|
|
| K314-S | Light Mag Release Spring - Standard | $1.95 | |
| K314-E | Light Mag Release Spring - Extended | $1.95 | |
|
|
 Designed for use with a lightweight trigger in conjunction with a properly executed trigger job. This eliminates
the need for a special hammer an sear to keep the hammer cocked when loading the first round or normal firing.
Properly installed, #2 engages the disconnector at all times, and #3 engages the trigger stirrup. With this spring, use the Colt
Government model hammers and sears for trigger jobs.
|
|
| K315 | National Match Custom 4-Leaf Sear Spring | $8.95 | |
|
|
 These pins are heat treated and ground to the maximum diameter on the 1911 part print to ensure a precise
fit for the hammer and sear.
|
|
| K316-BS | Oversize Hammer and Sear Pin Set - Blue Steel | $8.95 | |
| K316-SS | Oversize Hammer and Sear Pin Set - Stainless Steel | $8.95 | |
|
|
 High quality replacement pins for the 1911 Auto in a convenient, money saving pack. A set of 11
pins contains 1 each mainspring plunger, sear pin, ejector roll pin, mainspring housing pin, link pin,
mainspring housing retainer, strut pin, mainspring plunger retainer, hammer pin, slide release plunger, and thumb safety plunger. Heat
treated steel.
|
|
| K317-B | National Match Combat Pin Set (11 Pins), Blue Steel | $21.95 | |
| K317-S | National Match Combat Pin Set (11 Pins), Stainless Steel | $23.95 | |
|
|
 For
faster lock time and weight reduction, ultra-light for super locktime.
Supplied with Kings H.D. Firing Pin Spring |
|
| K300-45 | Kings Titanium 1911 Firing Pin - .45 Cal | $26.95 | ||
| K300-38/10 | Kings Titanium 1911 Firing Pin - .38/10mm | $26.95 | ||
|
||||
 Includes
one-piece guide rod and recoil plug, buffer pads and inner and outer recoil
spring set. Replaces factory guide rod with a heat-treated 416 Stainless
Steel one-piece guide rod and plug. Keeps slide, barrel and bushing in
proper alignment. Prevents recoil spring from buckling for smoother
operation. Improves accuracy and reliability - no chance of recoil springs
binding. You get smoother, more consistent and reliable cycling. |
||||
| K306B | Kings Recoil Spring Guide Kit for 10mm Colt Autos | $61.95 | ||
|
||||
 Prolongs
frame life with Hardball or heavier loads by cushioning slide-frame contact
when recoiling. Machined out of solid Stainless Steel. |
||||
| K307-G | Kings Recoil Buffer & Heavy Duty Plug Set - Government | $52.95 | ||
| K307-C | Kings Recoil Buffer & Heavy Duty Plug Set - Commander | $52.95 | ||
| K307-A | Kings Recoil Buffer Only | $43.95 | ||
| K307-B | Kings Heavy Duty Plug Only | $10.95 | ||
|
||||
|
Replacement
Stock screw bushings, set of four |
||||
| K320-B | Kings Stock Screw Bushings Set - Blue | $17.95 | ||
| K320-S | Kings Stock Screw Bushings Set - Stainless Steel | $17.95 | ||
| K320-IB | Kings Stock Screw Bushings Each - Blue | $4.95 | ||
| K320-IS | Kings Stock Screw Bushings Each - Stainless Steel | $4.95 | ||
|
|
|
Copyright © 1999-2009 www.GunAccessories.com All Rights
Reserved. |
|
A simple way to install a stemmed front sight onto Colt slides. Inexpensive, simple to use, and will to a
quicker, better job of staking front sights than any other tool available. We have been using this same type
of tool in our shop for years. Complete instructions included.