|
|
|
|
 The One Piece Full Length Guide Rod replaces your stock recoil guide without pistol modification. Assembly and disassembly are the same as with stock components (however a bushing wrench is required). Some shooters are in the habit of moving the slide back slightly to remove the barrel bushing, this is not possible with a one piece guide rod.Note: We Recommend using our #22 or #22P Barrel Bushing Wrench with this product. CAUTION: Safety glasses should be worn at all times when replacing or working with firearm springs. Failure to follow this safety precaution could result in bodily injury. |
| WC25C | "One Piece" Guide Rod, Commander with Plug. Fits: B & M | $44.95 | |
| WC25G | "One
Piece" Guide Rod, Govt./ Gold Cup with Plug. Fits: A, F, J, K, N, O & P |
$44.95 | |
| WC25P | Replacement Plug Only, Govt/ Comm. Fits: A, B, F, J, K, M, N, O & P Pkg. Includes: Plug Only | $16.95 | |
|
|
 There probably isn't a pistol that benefits more from a Full Length Guide Rod conversion than the Officers Model. First of all, you receive the typical reliability and accuracy improvements which are inherent with a two piece full length guide rod. Then we replace the failure prone stock plug with a highly reliable reverse plug and a single 24# spring. The result is a drastic improvement in performance that will surely be noticed the first time you fire your pistol. This kit will work with the *Colt Officers Model or *Para Ordnance P12, however both require a slight modification to the slide for installation (instructions included). The limited space in an Officers Model and P12 pistol causes extreme stress to be exerted on the recoil spring. For this reason, we recommend that SHOK-BUFF® Buffers should not be used in these pistols and the recoil spring should be replaced approximately every 300 rounds.Includes: Guide Rod, Plug, 24# Recoil Spring and Allen Wrench CAUTION: Safety glasses should be worn at all times when replacing or working with firearm springs. Failure to follow this safety precaution could result in bodily injury. |
| WC25CO | Guide Rod & Plug, Officers Model. Fits: C & L | $62.95 | |
| WC25COP | Replacement Recoil Spring Plug, for #25CO only. Fits: C & L Pkg. Includes: Plug Only | $25.95 | |
| WC25SC | Guide Rod & Plug, Springfield Compact. Fits: D | $62.95 | |
|
|
 Many shooters prefer a Two-Piece Guide Rod for its ease of disassembly and reassembly. Once you remove the front half of the rod with the provided allen wrench, disassembly is identical to that of stock components.
Includes: Guide Rod, Plug,
and Allen wrench. |
| WC148,5 | Two Piece Guide Rod & Plug. Fits: A, F, J, K, N, O & P | $46.95 | |
|
|
 Improve the accuracy of your 1911's stock barrel by adding a Dwyer "Group Gripper"™. The "Group Gripper"™ is a modified recoil spring guide and barrel link that uses heavy spring tension to force the rear of the barrel up into the locking lugs in the slide. The result is your pistol goes into battery exactly the same
every time, squeezing the utmost accuracy from your stock barrel. Combined with a #29 target bushing for a simple and inexpensive accuracy job. Minor parts fitting may be required.Note: We Recommend using our #22 or #22P Barrel Bushing Wrench with this product. |
| WC12G | Dwyer "Group Gripper*" Kit, Govt/ Gold Cup. Fits: A, N, O & P | $46.95 | |
|
|
 Combine the accuracy of a "Group Gripper™" and the reliability of a full length two piece stainless steel guide rod for an unbeatable package. In fact, with the additional purchase of our #29 barrel bushing, you have a simple and inexpensive accuracy job using your stock barrel. Minor parts fitting may be required.NOTE: We recommend using our #22 or #22P Barrel Bushing Wrench with this product. |
| WC203G | Full Length Guide Rod Kit, Govt./Gold Cup. Fits: A, F, N, O & P | $75.95 | |
|
|
 Replacement
of the Dwyer "Group Gripper™" link keeps your accuracy high.
|
| WC12LO | Replacement Link Only. Fits: A, B, M, N, O & P | $9.95 | |
|
|
|
Copyright © 1999-2009 www.GunAccessories.com All Rights
Reserved. |
|
