|
|
|
|
 Firing pins have been made from a wide variety of materials for a wide variety of applications. The Bullet Proof® Firing Pins claim to fame is that it outlasts all other 1911 firing pins, bar none. When you're after reliability that's the most important quality a firing pin could have.
|
| WC416,38 | Bullet Proof Firing Pin, .38/9mm. Fits: A thru O | $20.95 | |
| WC416,45 | Bullet Proof Firing Pin, .45 ACP. Fits: A thru O | $18.95 | |
|
|
|
This
is a set of all the pins necessary to construct, rebuild, or recondition a 1911 style Auto pistol.
Pins are manufactured of high grade steel and heat treated to the proper hardness. Includes: Link Pin, Sear Pin, Ejector Pin, Hammer Pin, Hammer Strut Pin, Mainspring Cap Pin, Mainspring Housing Pin Retainer, Plunger Pin, Safety Lock Plunger Pin, Mainspring Cap and Mainspring Housing Pin. |
| WC315B | Complete Pin Set for 1911 Auto, Blue. Fits: A thru O | $25.95 | |
| WC315S | Complete Pin Set for 1911 Auto, Stainless. Fits: A thru O | $30.95 | |
|
|
 Most firing pin stops are cheap, mass produced, stamped parts, but they're not Bullet Proof either. A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a standard firing pin stop. A quality firing pin stop should fit snuggly in place, therefore this part does require minor fitting to your particular pistol for a perfect fit.
|
| WC399B,70 | Bullet Proof Firing Pin Stop,
70 series, Blue, .45ACP. Fits: All Codes pre-80 series, .45 ACP |
$31.95 | |
| WC399B,80 | Bullet Proof Firing Pin Stop, 80 Series, Blue, .45 ACP. Fits: All Codes 80 Series, .45 ACP |
$31.95 | |
| WC399S,70 | Bullet Proof Firing PinStop,
70 Series, Stainless Steel, .45 ACP. Fits: All Codes pre-80 series, .45 ACP |
$32.95 | |
|
|
 Have
you ever needed a spring for your 1911 Auto and didn't have it? Do
you have the right recoil spring for that new practice round?
Don't get caught short. The Spring Caddy™ is a handy roll-up
organizer containing the most commonly needed 1911 Auto spring and
accessories. For the serious shooter, this compact accessory kit
is worth its weight in gold. Throw one in your range bag, you'll
be glad you did.Includes: Bushing Wrench, 4 Shok-Buff* Buffers,Firing Pin Spring, 6 Recoil Springs (9#, 10#, 12#, 15#, 17# & 18#) and Nylon Pouch |
| WC364 | Spring Caddy with Springs. Fits: A, F, H, K, N, O & P | $50.95 | |
|
|
 Replace your stock mainspring with our "Reduced Power" Mainspring for a lighter trigger pull. The hammer will be much easier to cock by hand and improves ejection reliability.CAUTION: The mainspring and other springs are under tension and eye protection should be worn for disassembly. We highly recommend our video #396 which demonstrates the proper procedure for replacement of springs. Failure to follow proper procedure could lead to bodily injury or damage to your firearm. |
| WC27 | Mainspring (Hammer Spring) "Reduced Power", Govt/Comm 19#. Fits: A, B, E, F, H, N & O |
$4.95 | |
| WC27OM | Mainspring (Hammer Spring) "Reduced Power" Officers, 21#. Fits: C |
$4.95 | |
|
|
 The Firing Pin Return Spring should be replaced every 5,000 rounds. Our "extra power" spring will help reduce the risk of accidental discharge should the pistol be dropped without reducing reliable ignition. |
| WC26 | Extra Power Firing Pin Return Spring. Fits: All Codes | $4.95 | |
|
|
|
A set of all the springs necessary to construct, rebuild, or recondition a 1911 style Auto pistol. These springs are produced from the finest high tensile spring steel assuring a consistently smooth action, positive ignition, and proper timing. IIncludes: Sear Spring, Heavy-Duty Recoil Spring, Extra-Power Firing Pin Return Spring, Plunger Spring, Magazine Catch Spring and Mainspring |
| WC316G | Complete Spring Set,
Government, .45 ACP, 18-1/2# Recoil Spring. Fits: A, F, H, N & O |
$26.95 | |
|
|
 A properly tuned 1911 Auto is unquestionably the finest combat pistol in the world. The first step when tuning your pistol is replacing the stock springs with Wilson "Custom-Tune" Springs. These springs are produced from the finest high tensile spring steel, assuring a consistently smooth action, positive ignition, and proper timing. Once installed, your pistol will be "Custom-Tuned" for maximum reliability. Includes: - Mainspring (Reduced Power) for reduced hammer tension, resulting in easier cycling and up to 25 percent reduced trigger pull. - Firing Pin Spring (Extra Power) Increased firing pin tension for longer life, and enhanced safety should the pistol be dropped. - Heavy-Duty Recoil Spring (Extra Power) Increases feeding reliability when shooting factory loads. Heavy-duty for longer life. - Heavy-Duty Recoil Spring (Reduced Power) A lighter spring for light practice rounds. Heavy-duty for longer life. |
| WC324C | Custom Tune Spring Kit, Commander 12#
RP, 20# EP Recoil Spring. Fits: B & M |
$23.95 | |
| WC324G | Custom Tune Spring Kit, Govt. 10#
RP 18 1/2# EP Recoil Spring. Fits: A, F, J, K, N & O |
$23.95 | |
|
|
 Wilson Heavy Duty Recoil Springs are made combat tough to repeatedly take a pounding yet show a remarkable consistent performance every time a round is fired. Keeping a fresh recoil spring in your pistol will dramatically reduce the pounding your slide and frame receive
|
| WC10CO24 | Recoil Spring for Colt Officers Model, 24#. Fits: C & L Pkg. Includes: One Recoil Spring per package | $9.95 | |
| WC10C20 | Recoil Spring for Commander, 20#. Fits: B & M | $9.95 | |
| WC10G9 | Recoil Spring for
Government, 9#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G10 | Recoil Spring for
Government, 10#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G12 | Recoil Spring for
Government, 12#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G13 | Recoil Spring for
Government, 13#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G15 | Recoil Spring for
Government, 15#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G16 | Recoil Spring for Govt. Model, 16#. Fits: A, F, J, K, N, O & P Pkg. Includes: One Recoil Spring per package | $9.95 | |
| WC10G17 | Recoil Spring for
Government, 17#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G18 | Recoil Spring for
Government, 18-1/2#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10G22 | Recoil Spring for
Government, 22#. Fits: A, F, J, K, N, O & P |
$9.95 | |
| WC10SC20 | Recoil Spring for Springfield Compact, 20#. Fits: Wilson/Kimber/Springfield Compact 4" bbl Pkg. Includes: One Recoil Spring per package | $9.95 | |
| WC10SC22 | Recoil Spring
for Springfield Compact, 22#. Fits: Wilson/Kimber/Springfield Compact 4" bbl |
$9.95 | |
|
|
| Producing a quality sear spring is quite tricky since it must be bent for custom tuning yet maintain a constant tension once set. A Bullet Proof® Sear Spring has the perfect balance of materials and temper to allow the pistolsmith the flexibility necessary to do a top quality trigger job which will continue to maintain its tension long after factory springs would have died. For a Bullet Proof® trigger job, get a Bullet Proof® Sear Spring. |
| WC417 | Bullet Proof® Sear Spring
Fits: All Codes Except L |
$9.95 | |
|
|
|
Copyright © 1999-2006 www.GunAccessories.com All Rights
Reserved. |
