Designed after the Original Galil Pattern and Looks Great. Manufactured for stamped receiver models.

Made two (2) inches longer to accommodate taller shooters

Positive Frame Locking System for better control

• Can be folded for pre-ban rifles
• Ability to pin open for post-ban rifles

Easy to install

Built to last

• Constructed of sturdy advanced polymer with matte black finish
• Reduced weight without compromising strength

Ribbed buttplate to prevent slips

Made in the U.S.A. and counts as a Compliance Part
Does Not Include Pistol Grip.

FITS STAMPED RECEIVERS ONLY.
AVAILABLE IN: OD GREEN, FLAT EARTH (TAN), BLACK

Designed after the Original Galil Pattern and Looks Great. Manufactured for stamped receiver models.

Manufactured out of military grade composite to ensure high
quality and strength. No modifications required for stamped 1.05mm receivers with standard tang Easily modified for thicker receivers.

Perfect for private defense, military and police applications; six (6) position stock easily adjusts to body armor Ergonomically designed for better comfort U.S. Sec. 922r compliant part Made in the U.S.A.

Marked U.S.A.
Made in the U.S.A. and counts as a Compliance Part

Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). NOTE: Stock and handguard are Made in USA and count towards compliance parts.

• Six-Position Collapsible/Side Folding
• Folds to the Left Side of the Receiver (One Second Open/Close)
• Removable/Adjustable (3/8”) Cheekrest
• Removable Buttpad
• Store Extra Light/Laser/Batteries Inside Stock Tube
• May be fired from folded position
• Sling Swivel Stud
• Improved Ventilation
• Use Original Mounting Hardware for Installation
• Assembled in Fixed Position
• Ergonomic and Textured Upper and Lower Handguards
• One 4” and Three 2” Picatinny Rails
• Molded Inserts for When Rails are Not Used
• Rails are Removable and Interchangeable
• Handguards are Ventilated
• Sling Swivel Stud
• Count Towards US Compliance Parts
• Ergonomic, Textured Pistol Grip
• Installs with Original Mounting Hardware (Screw & Nut)
• Matches Advanced Technology, Inc Handguards
• Counts Toward US Compliance Parts
• Virtually Indestructible
• Matte Black
• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing

FITS: All AK Variants (Stamped Receivers)

This U.S. made compliance part reduces heat and improves ventilation with a greater cooling area around the barrel than standard handguards.

You’ll get a sure grip every time – with or without gloves. Modeled after the original Galil pattern, these handguards work with the original gas tube and have an optional top cover.

• Made of heavy-duty composite
• Matte black finish
• Matches AK SAW pistol grip
• Cleaning rod functions as original
• Installation is quick and easy

Folding stock for AK-74. Folds to left side.

Russian AK-74 Side Folding Stock. Requires The Receiver to be milled for the stock to work. We have item Number AK-BFS which is a no gunsmithing side folder AK-74 stock.

Comfortable and dependable

• Better comfort with its original, ergonomic angle
• Unique texture prevents slipping

Strong and durable - made of Nylon 66 with 33% fiberglass
Perfect for storing cleaning kit; includes original style trap door

Made in the U.S.A and counts as a compliance part
Perfect in conjunction with Folding Stock

• Easy to fit and secure - Quick Release button.
• Fits hand guards equipped with a Weaver or Picatinny rail system.
• Natural Fighting stance hold on your rifle - Slightly angeled to counter recolil.
• Improved performance in reaction, on target time and muzzle control during rapid fire.
• No gunsmithing is required.
• Quick Release mechanism.
• Moulded from reinforced plastic composite.
• Super lightweight.

• Provides increased control during firing
• Finger grooves, palm swell and contoured backstrap allow and increased powerful grip
• Easily changeable front and rear rubberized grip inserts mount securely
• Mottled surface minimizes risk of slippage when wet
• Easily replaces standard grip
• Constructed of high density polymer

• Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
• Quick flashlight detachment. • Transforms a horizontal grip to a vertical grip for different shooting applications.
• When in horizontal position - just push grip open and it locks in Vertical position.
• When in vertical position - press button and fold back.
• Natural "fighting stance" hold on your rifle.
• Designed to mount on Picatinny or weaver rail.

• The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".
• This unique grip permits several gripping positions, such as forearm, foregrip and many others.
• Most important is the way it fits perfectly in your hands.
• Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4.
• Easy to fit on any firearm with a weaver or picatinnt rail.
• The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights.
• No gunsmithing required.
• Molded from reinforced polymer composite.
• Super Lightweight.

• No Slip Design
• Double sided pressure pad housing
• Internal water-proof battery compartment
• Quick-release attachment mechanism
• Additional locking screw option
• Durable and lightweight polymer construction
• Easy to mount, requires no gunsmithing
• Available soon in OD Green and Desert Tan

• Foldable Tactical Foregrip with 5 Adjustable Positions to Allow for Versatile Shooting Positions and Enhance Target Lock Performance Under Toughest Environments
• Press the Position Button to Fold Forward/Backward and Release the Button to Lock in Desired Position
• Designed to Mount on Any Picatinny/Weaver Rail with Ergonomic and Non-slip Features for Superior Control of Weapon
• Ambidextrous Design, Complete with Battery/Tool Compartment and Pressure Switch Housing

Tactical Ergonomic Foregrip with:

• Non-slip Features

• Complete with Battery Compartment

• Pressure Switch Housing

• Picatinny Mounting Deck

Tactical Ergonomic Foregrip with:

• Five position

• Glass-filled nylon

• Weatherproof

• Made in USA

• Lifetime warranty

• No gunsmithing

*Fits any standard picatinny rail

• This unique tactical grip allows the operator to use his 1" Flashlight.
• The most ergonomically designed vertical foregrip.
• Has storage compartment for batteries, cleaning kit...
• A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself. (No need for balky and pricy pressure switches.
• Fits any weapon with a weaver or picatinny rail.
• Mounted using a quick release locking system with an additional locking screw as backup.
• No gunsmithing required.
• Molded from reinforced polymer composite.
• Super lightweight.

• Precision machined with maximum strength

• Four 6” long mil-spec Picatinny rails with 14 slots each for versatile accessory applications

• Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit-

  • Lower quad-rail system to secure barrel

  • Upper quad-rail system to secure gas tube

  • Simple and friendly installation, no gunsmith required

• Great zero-retention capability for all accessories installed on the rails

• Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance

• Specially designed groove rail top for optimal viewing through front sight

• Fits Model 47 and variants with oversized barrel and rear sight block

• Hard anodized finish for wear resistance

• UTG rubber rail guards included for great comfort and protection