Model

Description

LR-OB

Offset Bushing

Adapts Military .250” Uppers front hole diameter to Lowers with 5/16” front pivot pin hole diameter.

LR-OSN

Offset Screw & Nut

Offset screw and nut that is used to convert large Lower (.312 dia.) with the small hole Upper (.250 dia.). The steel offset screw has a larger screw head and a screw driver nut head as well. Similar to the Colt side 2 pc. screw system.

LR-OS2

The "Claw" is the perfect armorer tool for holding all .308 upper receivers. Made of a solid one piece high strength polymer, the Claw is extremely durable. Simply clamp the Claw into a bench vise, slide the upper onto the Claw, secure with the two holding pins and begin installing your barrel and components.

308-TL-PRC

308 Panther Claw

TL-PRC

223 Panther Claw

Used to install most free float tubes to upper. Made from steel plate with two wrenching pins.

All Steel

FF-W1

Free Float Tubes Installation Wrench

• Install and disassemble Free Float Tubes

• Install and disassemble Barrel nut

• Install and disassemble Compensator

• Install and disassemble Barrel Extension Tube

• Install and disassemble Carbine Stock

• 1/2” dive for socket wrench

• Screw driver tip for buttstock screw

• Hole for hanging on wall

• 4140 Steel, mag phosphated

TL-MW

AR Multi Tool

A-15/ M-16 Barrel Extension Wrench. Barrel extension wrench is designed to assist the removal and installation of the barrel extension. Alson prevents misalignment with outer guide shell.

TL-BX

A-15 / M-16 Barrel Extension Wrench

Removes barrel nut, extension tube, and flash suppressor.

TL-02

Combination Wrench

CAR STOCK SPANNER WRENCH

CS-15/45

Carbine Stock Spanner Wrench

Hard plastic tapered punch that can be used to drive out the front and rear pivot pins. Will not scratch or mar your pins or receiver.

TL-PU

Great for home repair and sight adjustment. Contains 1 each of the following.

Steel: 1/16”, 3/32”
Brass: 1/8”, 3/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”

TL-08

Military Punch Set

Professional gunsmith punch and hammer set in a hard, plastic case.

Includes: Brass Hammer with steel knurled shaft, 8 each brass punches from 1/16" and 3/32", 2 each Delrin Punches 15/64" and 3/8", 2 each steel punches 1/16" and 3/32".

TL-PHK

This tool simply inserts into the magazine housing on the lower receiver, giving you the leverage needed to compress the delta ring assembly. This compression allows the handguards to be easily removed as well as giving you easy access to the gas tube. Works with the A-15/EM-16, AP4 or Car-15 rifle.

Rifle must have the standard 2-piece handguard.

TL-HGR

"The Flipper", made of Delrin, is a versatile armorer's tool. Clamp "The Flipper" into your vise and it holds any A-15/EM-16 lower receiver for assembly purposes. When finished, simply loosen the vise, flip "The Flipper" over and it will hold or retain any A-15/EM-16 upper receiver for assembly purposes.

MA-FP

The MagCinch Tool is designed with the avid AR shooter in mind. The MagCinch Tool incorporates several needs into one compact package, and weighs less than 2 rounds of ammo! The metal insert is made of a high carbon stainless, heat treated to a Rockwell of 48-50. Parts and Use:

• A: First, you have a front sight adjustment tool.

• B: Second, you have a MagCinch strap tightening device to assist you in getting your MagCinch units installed correctly.

• C: Third, you have a bolt face cleaning tool. This tool is the exact size of the 5.56mm/.223 bolt face. Lets you remove any built up residue and fouling.

• D: Fourth, you will find two disassembly punches. One is large enough for the take down pin and the other is for the pins in your lower receiver. Using these tools will make sure you don't mar the finish of your favorite rifle.

• E: Fifth, is a tool that can be used in place of a Phillips screwdriver or can be used as a scraper.

• F: Sixth, you will find a Lanyard loop, which allows you to tie your tool to you web gear or tool bag so you don't lose it. The MagCinch Tool is patent pending.

TL-MCT

CAR buffer with tungsten counterweights. Slows down cycle rate on carbine AR rifle. Works great on 7" and 11" shorty barrels.

BS-CWB

BS-11T

CS-T2

Avoid an expensive suit, Invest in a cheap jacket.

Fits most A-15/EM-16 models & configurations. Carry handle fixed or removable; flattop Tri-mount fixed or collapsible; and all barrel & forearm styles including free floating forearms.

LJ-01

Made from nickel plated steel.

FL-01

Locks into barrel extension to prevent movement of bore guide. Won't damage barrel or receiver.

BG-BE

Guides cleaning rod straight into barrel. O-Ring seal prevents oil and debris from coming back into the action.

CA-B223

Guides cleaning rod straight into barrel. O-Ring seal prevents oil and debris from coming back into the action.

CA-B308

Designed by our Armorers this kit is a complete tool kit for anyone with AR type rifles. All the tools you need to handle any task for the serious gunsmith to the average shooter. Includes tool box.

• 1 MA-FC Lower Vise Block

• 1 PR-02 Action Block

• 1 CA-10D 5pc Cleaning Rod

• 1 CA-11 Bore Brush (.223 Cal.)

• 1 CA-12 Chamber Brush (.223 Cal.)

• 1 CA-13 Cleaning Brush

• 1 CA-15 Oil Bottle

• 1 TL-08 9pc Punch Set 1 TL-A1 A1 Sight Tool

• 1 TL-A2 A2 sight Tool

• 1 TL-MW Multi-Tool Wrench

• 1 CS-15/45 Spanner Wrench

• 1 TL-03 Headspace Gauge (Go)

• 1 TL-03B Headspace Gauge (No Go)

• 1 TL-038 Headspace Gauge (Field)

• 1 BX-7160 Tool Box

TL-AKT

.223 broken shell extractor, steel construction.

TL-SE

Extra long pipe cleaners for cleaning the entire inside diameter of the gas tube. 20 pieces per package.

PC-GT

This tool is used to separate the AR upper and lower while cleaning the barrel and chamber. This allows you to keep the upper attached to the lower while cleaning.

Remove rear pin and install this tool into the rear pin and install this tool into the rear hole of upper and lower.

TL-CLT

The .308 Chamber Brush cleans both the barrel chamber and the inside of the barrel extension.

308-CA-12

Chamber Maid flexible cleaning rod for your rifle.

CA-CM223

CA-CM308

CA-CM762

Barrel extension and lug recess swab kit from CJ Weapons Accessories.

CA-CJ1

The HEADSPACE GAGE is designed to protect your firearms from unnecessary damage and you, the shooter, from possible injury by showing whether or not the "headspace" of an action is within tolerance. Essentially, headspace is the distance between the face of the breech and the base of the cartridge when the action is closed. Accuracy and safety is threatened when there is excessive headspace.

Forster Headspace Gages are made with painstaking care to insure you accurate testing of the chamber. Each caliber Gage comes in "GO", "NO GO", and "FIELD". If an action will not accept a "GO" Gage, it will not accept cartridge cases of maximum length. If it accepts a "NO GO" Gage the action may have excessive headspace. If the action accepts a "FIELD" Gage, it should not be fired. Every firearms owner should have Forster Headspace Gages for safety and accuracy.

TL-03

TL-03A

TL-03B

TL-03C

TL-762A

TL-762B

TL-762C

Drop ACCU-Wedge in rear of lower receiver as shown. Close upper receiver, squeeze and push pin in place.

Accu-Wedge buffers A15/EM16 cycling system to reduce wear, provide a more solid feel by eliminating play in receiver. Easy to install, requires no weapon modifications.

ACU-01

Dry Fire Safety Device for AR-15/M-16 Service/Patrol Rifles

• Provides safe unlimited dry-firing and safe storage of M-16's, AR-15's, and other semiautomatic rifles based on the M-16.

• Eliminates the risk of negligent or accidental discharges by positively preventing the hammer from impacting the firing pin.

• Improves reliability by eliminating impact damage to the firing pin.

• Facilitates dry-firing by resetting the trigger mechanism with an approximately 1 1/4" movement.

• Drop-in, symmetrical, one-piece design makes installation and removal quick and easy.

• Available in black only.

TL-DF