|
|
|
Quickly snaps on and off. Protects front and
rear sights. Made of hard plastic. |
|||
FS-PC |
Front & Rear Sight Protectors |
$25.95 | |
|
For use with the M-16/AR-15 A2 rifles. Used to install A2 style adjustable rear sights. |
|||
TL-RST |
Rear Sight Installation Tool | $49.95 | |
|
A1 Front & Rear Sight Adjusting Tool, Steel, 5 prong. A1 Sight Tool. |
|||
TL-A1 |
Sight Adjusting Tool - A1 Front & Rear |
$7.95 | |
|
A2 Front Sight Adjusting Tool, 4 prong, Steel. A2 Sight Tool. |
|||
TL-A2 |
Sight Adjusting Tool - A2 Front |
$6.95 | |
|
Key Ring not included. Ready to install on your keychain. |
|||
TL-A3 |
Sight Adjusting Tool - Keychain Style A2 |
$6.95 | |
TL-A4 |
Sight Adjusting Tool - Keychain Style A1 |
$6.95 | |
|
Oversize front sight taper pins for re-aligning and replacing front sight bases. |
|||
FS-06L |
Oversize Taper Pins |
$1.95 | |
|
Replaces rear take down pin to eliminate play
between receivers. 3 Piece Construction |
|||
LR-TP |
JP AR Rear Tensioning Pin | $64.95 | |
|
Special designed front receiver pin with ball
detent, allows fast disassembly and assembly. Made from Steel. Replaces
screw pin on Hartford Horsey logo lower receivers for easy take-down. |
|||
|
LR-QT |
AR-15 Quick-Take Down Pin (For every Hartford Horsey Logo Sporter and SP1/SP2.) | $7.95 | |
|
Special designed front receiver pin with ball
detent, allows fast disassembly and assembly. Made from Steel. Replaces
screw pin on Hartford Horsey logo lower receivers for easy take-down. |
|||
|
LR-QT-S |
AR-15 Quick-Take Down Pin (for Hartford Horsey Logo Sporter and Match target.) | $12.95 | |
|
These replace original hammer trigger pins. They extend past the receiver on each side and are retained by special retaining rings for a more positive lock. 2 pins and clips per set. |
|||
|
LR-AW |
AR-15 Anti-Walk Pins | $5.95 | |
|
Stainless steel standard pins for AR-15/M-16 large pin hammer and trigger. |
|||
|
TP-KNS |
Stainless Steel Pins For Standard Pinhole | $4.95 | |
|
TP-KNS1 |
Stainless Steel Pins For Large Pinhole | $4.95 | |
|
Standard “Original” replacement screw and pin for older Hartford horsey logo’s with a pin diameter of .312” (Approx. 5/16”) |
|||
|
LR-CP |
Hartford Horsey Logo Screw & Pin Set | $9.95 | |
|
Replaces A1 Rear Sight Windage Drum. |
|||
|
UR-39A1 |
Rapidex Knob | $9.95 | |
|
KNS Precision EM-16 Non-Rotating Sear Pin has a phosphated finish. |
|||
|
LR-KNS-1 |
Non-Rotational M-16 Sear Pin | $49.95 | |
|
Special anti-spin/anti-creep retainers prevent all wear to your receiver's trigger and hammer pin holes. Stainless steel pins, black oxide end screws. Installation tool and allen wrenches included. For Large Pin - .170 diameter |
|||
|
LR-KNS-2 |
Non-Rotational Small Trigger Group Pins | $54.95 | |
|
LR-KNS-3 |
Non-Rotational Large Trigger Group Pins | $54.95 | |
|
"The Perma-Pin" |
|||
|
BT-KNS16 |
Firing Pin Retaining Pin | $12.95 | |
|
KNS Stainless Steel Trigger Group Pins. .154 diameter (small). Set of 2. KNS Stainless Steel Trigger Group Pins. .170 diameter (large). Set of 2. |
|||
|
LR-KNS-4 |
Stainless Steel Small Trigger Group Pins | $9.95 | |
|
LR-KNS-5 |
Stainless Steel Large Trigger Group Pins | $9.95 | |
|
KNS Front Pivot Pin with Sling Stud, .250 diameter (small). Opposite side has screw to prevent accidental pin removal by the sling |
|||
|
LR-KNS-6 |
Small Pivot Pin w/Sling Stud | $21.95 | |
|
KNS Front Pivot Pin with Sling Stud, .315 diameter (large). Opposite side has screw to prevent accidental pin removal by the sling |
|||
|
LR-KNS-7 |
Large Pivot Pin w/Sling Stud | $21.95 | |
Copyright © 1999-2009 www.GunAccessories.com All Rights
Reserved.
Orders: 800-653-7890 Tel: 704-821-4679 Fax: 704-821-4644
CIE Global, PO Box 2490, Indian Trail, NC 28079
Order status? Orders@GunAccessories.com
Sales@GunAccessories.com
