• Carbine length M4 replacement forend rail system

• System adds four mil-spec Picatinny rails for versatile accessory applications

• Precision machined from 6061 T6 billet

• Aluminum for Maximum strength

• Fully rugged construction will not bend or deform under any condition

• Field tested under extreme conditions for maximum performance and durability

• Hard coat anodized for optimum wear resistance

• Simple installation, replace your polymer hand guards and secured by 4 bolts

• Rail system firmly locks to the barrel nut and front

• Hand guard Cap No gunsmith required

• System aligns perfectly upper receiver rail

• Receiver alignment is achieved by implementation of anti-rotation locking tabs

• Slim profile for better grip and handling of the firearm

• Enables three picatinny rails.

• Mount picatinny based accessories on your shotgun.

• State of the art ergonomic design.

• Durable, hardwearing & lightweight construction.

• Quick & easy installation.

• No gun smiting required.

• Improves thermal insulation.

• Constructed from reinforced polymer composite.

This quality U.S.A. manufactured A-2 pistol grip will fit any Ar-15 lower receiver and is available in black or green.

These quality machined handguards are made in the U.S.A. from aircraft aluminum. They are available for the full length or shorty barrel. The handguards are tapped for a sling swivel and bipod stud. The handguards come complete with all mounting hardware.

These quality round handguards are made in the U.S.A. and come complete with metal liner to protect against the barrel heat. Availble in both green and black for the shorty or full length rifle.

These quality M-4 handguards are made in the U.S.A. and fit all the shorty AR-15 type rifles. The M-4 handguards are lined with metal to protect against barrel heat. The M-4 handguards have a larger diameter than the A-2 handguards.

• Weight: 9.9 oz.

• No gunsmith installation. Simply install like factory plastic units.

• MIL-STD 1913 rails.

• Solid lock-up.

• T-marked for accessory location.

• Constructed of 6061 hard coat anodized for a lifetime of service.

• Grenade launcher or shotgun compatible with lower section removed.

• High quality at an affordable price.

• Weight: 16.0 oz.

• No gunsmith installation. Simply install like factory plastic units.

• MIL-STD 1913 rails.

• Solid lock-up.

• T-marked for accessory location.

• Constructed of 6061 hard coat anodized for a lifetime of service.

• High quality at an affordable price.

The M33 is built to fit the M16/AR15 carbine. Replace your existing hand-guard with this polymer handguard which provides 2 mounting rails, complete with 2 Vented and 2 Non-Vented thermal rubber rail covers and heat shields. No tools or gunsmithing required, handguard mounts just like factory handguards.

• Rails can be mounted on the left/right side, or the top/bottom of the handguard.

• 4 sided Picatinny rail system

• Metal heatshields dissipate high tempertures producted during sustained rapid fire.

• Thermal rubber covers enhance grip and protect rails when not in use.

• No gunsmithing required, handguards mounts just like factory handguards.

• 2 Vented and 2 Non-Vented Rail covers included.

• 4 sided Picatinny rail system

• Metal heatshields dissipate high tempertures producted during sustained rapid fire.

• Thermal rubber covers enhance grip and protect rails when not in use.

• No gunsmithing required, handguards mounts just like factory handguards.

• FREE RAIL COVERS INCLUDED

• NOW AVAILABLE IN ALUMINUM

• 4 sided Picatinny rail system

• Metal heatshields dissipate high temperatures produced during sustained rapid fire.

• Thermal rubber covers enhance grip and protect rails when not in use.

• No gunsmithing required, handguards mounts just like factory handguards.

• 2 Vented and 2 Non-Vented Rail covers included.

• NOW AVAILABLE IN ALUMINUM

• 4 sided Picatinny rail system

• Metal heatshields dissipate high temperatures produced during sustained rapid fire.

• Thermal rubber covers enhance grip and protect rails when not in use.

• No gunsmithing required, handguards mounts just like factory handguards.

• Rail covers included.

Two 45 degree Picatinny rails with removeable center rail for AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting lasers/flashlights/vertical grips/bipods. Fits both, standard & thickend heat shields
Made from reinforced polymer.

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for standard handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm

Precision machined with maximum strength.
Four mil-spec Picatinny rails for versatile accessory applications.
Simple and friendly installation, no gunsmith or tool required.
Solid locking features for most secure fit.
Ultimate tactical solution to enhance accuracy under toughest environments.
Fits CAR length model 4,15,16 and variants.
Hard anodized finish for wear resistance.
UTG rubber rail guard included for great comfort and protection.

• Precision machined with maximum strength

• Four mil-spec Picatinny rails for versatile accessory applications

• Simple and friendly installation, no gunsmith or tool required

• Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit

• Ultimate tactical solution to enhance accuracy under toughest environments

• 12" long top & bottom covers

• 27 slots on each side of Picatinny/Weaver quad rail

• Fits rifle length Model 4, 15/16 and variants

• Hard anodized finish for wear resistance

• 20 pieces of UTG rubber rail guards included for great comfort and protection

Hogue's OverMolded technology has been applied to the Colt AR-15 producing the ultimate grip and forend combination. The O.M. AR-15 grip is specially designed to retain the important lines and aesthetics of the AR, while at the same time providing a comfortable lightweight rubber grip with finger grooves and palm swells. The two piece design installs easily on any AR-15 , M-16 and similar style rifles.

Great quality replacement handguard for M4 carbine. Oval shaped with heat-shielded aluminum lining. Light weight and extremely tough and durable for use under all weather and environment conditions.

Robust Design with combat grade synthetic material. Ergonomic finger grooves provide solid and repeatable grip. Additional hand support provides stable and easy trigger control. Very well designed to offer great comfort and better control. Increase shooting performance and accuracy. Available in Black, OD Green and Desert Tan.

6 piece interchangeable pistol grip for M16/AR15 and similar type firearms. Grip incorporates multiple finger groove and palm swell inserts (3 each) allowing the user to customize their grip to fit all hand sizes for maximum comfort and control.

• Provides increased control during firing

• Finger grooves, palm swell and contoured backstrap allow and increased powerful grip

• Easily changeable front and rear rubberized grip inserts mount securely

• Mottled surface minimizes risk of slippage when wet

• Easily replaces standard grip

• Constructed of high density polymer.

This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself.
(No need for balky and pricy pressure switches.
. Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super lightweight.

This new TACTICAL PISTOL GRIP is sure to increase the performance of your rifle or carbine.

• Transforms a horizontal grip to a vertical grip

• Perfect for undercover work

• Weapon will fit easier in gun case and paratroopers weapon rack

• Deploy faster from vehicles

• Quick Fold/Unfold button

• Made from reinforced plastic composite

If you own a handgun with rails and you decide to mount the grip onto your handgun, your handgun will be classified as an Any Other Weapon (AOW).
You must register your weapon with ATF. You can download ATF form 1 here.

This grip is intended to be used on long weapons.
When mounted on a glock or any other Polymer handgun, there is a risk that the grip will slide off during shooting - because of the flexibility of the handgun's rail, so please do not mount the grip on a handgun!.

Developed by Fab Defense, this unique folding grip to enable the operator to switch between horizontal and vertical grip.

• Easy to fit and secure - Quick Release button.

• Fits hand guards equipped with a Weaver or Picatinny rail system.

• Natural Fighting stance hold on your rifle - Slightly angeled to counter recolil.

• Improved performance in reaction, on target time and muzzle control during rapid fire.

• No gunsmithing is required.

• Quick Release mechanism.

• Moulded from reinforced plastic composite.

• Super lightweight.

Provides a platform for support to adjust hand elevation of the rifle. Flat surface helps stabilize and support rifle.

• Target Shooting Stand snaps into UPG16 and UPG47 grips.

This Revolutional Accessory enables you to carry a spare mag, ready to use, on your weapon.
The MG20 serves as a spare mag carrier, but also as a unique ergonomic fore grip

• Quick Release button - just slide the grip onto the rail.

• Backup Locking Screw - Should you decide to lock it in place when not using the quick release mechanism.

• Magazine release button - similar to the AR15/M16 one - to quickly release the magazine.

• Can be used asan ergonomic foregrip even without the magazine inside.

Nothing simmilar exists!
This Adapter is made for the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
The adapter will fit any long weapon with a picatinny / weaver rail.
Features:

• Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.

• Quick flashlight detachment. • Transforms a horizontal grip to a vertical grip for different shooting applications.

• When in horizontal position - just push grip open and it locks in Vertical position.

• When in vertical position - press button and fold back.

• Natural "fighting stance" hold on your rifle.

• Designed to mount on Picatinny or weaver rail.

• The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".

• This unique grip permits several gripping positions, such as forearm, foregrip and many others. Most important is the way it fits perfectly in your hands.

• Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4.

• Easy to fit on any firearm with a weaver or picatinnt rail.

• The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights.

• No gunsmithing required.

• Molded from reinforced polymer composite.

• Super Lightweight.

The best and most affordable Tactical Vertical Grip out there.
Features:

• No Slip Design

• Double sided pressure pad housing

• Internal water-proof battery compartment

• Quick-release attachment mechanism

• Additional locking screw option

• Durable and lightweight polymer construction

• Easy to mount, requires no gunsmithing

• Available soon in OD Green and Desert Tan

Tactical Ergonomic Foregrip with:

• Five position

• Glass-filled nylon

• Weatherproof

• Made in USA

• Lifetime warranty

• No gunsmithing

*Fits any standard picatinny rail

Tactical Ergonomic Foregrip with:

• Non-slip Features

• Complete with Battery Compartment

• Pressure Switch Housing

• Picatinny Mounting Deck

Note: AR-15 Stock Must Be Extended 3"to Operate Charging Handle
FITS : All AR-15 and Variants

Scopes & Mounts

Magazines & Accessories

Lasersights

Parts

Muzzle Brakes

Flashlights

Grips & Forends

Books & Videos

Samco AR-15/M16 Tactical Accessories

Picatinny Forearms, Mounts & Accessories