Fully machined aluminum with a square post and round peep hole. This model has the unique feature of switching between 4 different aperture holes. Folds flat on flat top for use with an optic and pops up for use with your front sight.

• A2 style dual aperture fully protected from accidental damage.

• Thick rugged pivot ears, twice as thick as the competition.

• A locking detent with double the locking surface, for maximum strength.

• A lock detent button with stepped down turns, to provide a surface you can grab onto, if your hands are muddy or wet.

• Made from 6061 aluminum, and mil-spec hard coat anodizing, to stand up to the most extreme conditions.

• Same style wind age knob as on the standard M-16

• .65 moa on the M-4 type rifles.

• .49 moa on the A-4 type rifles.

• Package includes allen wrench for installation.

• Uses standard A2 front sight post.

• Super smooth ball bearing pivot detent automatically locks in the raised position with lock detent button.

• Comes in two heights.

• Rail height for forearm mounting and gas block height.

• Rail mounted sight is the same height as a F marked front sight post.

• Constructed of high quality 6061 aluminum hard coat anodized for a lifetime of service.

• Rail version folds to the rear, Gas block version folds to the front

Six-position collapsible stock with rubber non-slip recoil pad and skeletonized design features a Picatinny rail and storage compartment for CR123 batteries (4 total) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

The CAA Sniper Stock is the result of more than two years of research and development. Designed in conjunction with special units of the IDF (Israel Defense Force) the CAA Sniper Stock is designed to meet the demands of the precision marksman community. The Sniper Stock has proven to provide rapid target acquisition, faster and more accurate follow up shots, and quicker target-to-target attainment. Completely adjustable and featuring a rear-folding pod that converts an A2 rifle, SR-25 rifle, or M4 carbine with a bipod, into a stable shooting platform with three-point support, the CAA Sniper Stock is in a class of its own. Operators who have evaluated the CAA Sniper Stock have found its unique features exceed all of their requirements. Finally, the ultimate sniper stock for the M16/AR15/ SR25 is now available.

• Greatly increases the cheek support while shooting.

• Significantly improves the cheek and head stability while aiming and shooting - eliminates the typical head movement and fatigue associated with ‘sighting in’ targets for extended periods.

• Faster target acquisition and stay on target.

• Can store up to six CR123 batteries.

• Can store cleaning materials and other small gun parts.

• Waterproofed.

• Lightweight.

• Suitable for butt stocks manufactured by CAA, Colt, Bushmaster, Tapco, Rockriver Arms, Armalite, Colt Canada and many more.

Fully machined aluminum with a round post and round peep hole. Folds flat on flat top for use with an optic and pops up for use with your front sight.

This incredible single pouch attaches to any A-1, A-2 full stock or A-2, M-4 collapsible stock. Perfect for that extra mag when you need it now.

[NO PICTURE]

Made in the USA

Kit includes:

• Single stage trigger group with precision ground trigger pins

• Stainless steel serrated trigger

• Hammer & disconnect

Fits all AR-15/M-16/M-4 rifles without the use of swivels or clamps. Allows the rifle to be carried in the upright ready position for immediate use.

This incredible tool features all in one, a handguard removal tool, M-4 buttstock tool. standard and heavy barrel flashider tool, torque wrench slot, free floating handguard wrench and delta ring wrench.

These pads are made in the U.S.A. and fit the A-2 and M-4 Collapsible stocks as well as the A-2 Fixed collapse post ban stock.

Precision made in the U.S.A. the carry handle is constructed of machine grade aluminum and comes complete with a national match rear sight. 100% complete, ready to install on your flat top upper.

The side sling adapter is precision manufactured in the U.S.A. and will fit all heavy barrel and standard barrel AR-15 type rifles. Easy to install, the side sling adapter can be used on the left side or ride side of the rifle.

This quality produced gas block is manufactured in the U.S.A. from aircraft grade aluminum and is available for the standard barrel or bull barrel. Allows you to replace the front sight for flat top use. We have a detachable front sight available separately for the gas block.

This front sight is precision manufactured in the U.S.A. from aircraft grade aluminum. This front sight attaches directly to the Pictinnay gas block which is sold separately.

This quality tool is manufactured in the U.S.A. and is essential for barrel replacement, flash hider installation / removal. Has slotted center hole for torque wrench.

This quality set of synthetic U.S.A. clamps are essential for upper receiver work and will not mark the receiver. Fit A-1, A-2 and flat top receivers. Fits any vise at least 6".

This standard charging handle is produced in the U.S.A. and will fit any AR-15 Type Rifle.

This quality charging handle and tack latch is manufactured in the U.S.A. and will fit any AR-15 Type Rifle.

Replaces the standard latch on the charging handle for a faster more secure grip of the charging handle. Quality made in the U.S. A. the tack latch will fit any brand charging handle.

This GI mil spec sling system is everything you need to carry your AR-15 / Colt Sporter  type rifle in the upright readyto use position.

Checkered, easier to operate with your trigger finger. Replaces the standard magazine catch. A replacement spring is included.

This is the practical way to release your magazine from either your left or right hand. Ideal for quick reloads while keeping your rifle on target.

Extra wide and long for easier operating of your charging handle with low mounted scopes.

Enidine AR-Restor Hydraulic Recoil Buffer. This is the best buffer on the market today! Reduce felt recoil, improve accuracy, reduce fire rate, suppress bolt bounce, and protect your valuable optics with this simple drop-in replacement. Enidine hydraulic recoil buffers have been employed in military applications to reduce recoil, improve accuracy and increase reliability. Examples include the soft mount for the M2 machine gun and the M249 SAW. Tests have shown the buffer to produce a reduced rate of fire by approximatly 200 rounds per minute. The Enidine AR-Restor Hydraulic Recoil Buffer comes with a full 1 year warranty and fits all collapsible stock tubes.

Scopes & Mounts

Magazines & Accessories

Lasersights

Parts

Muzzle Brakes

Flashlights

Grips & Forends

Books & Videos

Samco AR-15/M16 Tactical Accessories

Picatinny Forearms, Mounts & Accessories