• Carbine length M4 replacement forend rail system

• System adds four mil-spec Picatinny rails for versatile accessory applications

• Precision machined from 6061 T6 billet

• Aluminum for Maximum strength

• Fully rugged construction will not bend or deform under any condition

• Field tested under extreme conditions for maximum performance and durability

• Hard coat anodized for optimum wear resistance

• Simple installation, replace your polymer hand guards and secured by 4 bolts

• Rail system firmly locks to the barrel nut and front

• Hand guard Cap No gunsmith required

• System aligns perfectly upper receiver rail

• Receiver alignment is achieved by implementation of anti-rotation locking tabs

• Slim profile for better grip and handling of the firearm

• Enables three picatinny rails.

• Mount picatinny based accessories on your shotgun.

• State of the art ergonomic design.

• Durable, hardwearing & lightweight construction.

• Quick & easy installation.

• No gun smiting required.

• Improves thermal insulation.

• Constructed from reinforced polymer composite.

Our new and improved version of the 4 rail free float tube. Featuring a solid one-piece free float tube made from 6000 series aluminum with a T6 heat treatment. The Picatinny style rails are integrally machined into the free float tube. This is compared to having the rails bolted on. The Picatinny rails are designed for the attachment of foregrips, flashlights, optics or any other type of rail mounted accessories. The free float tube is also vented for increased airflow to the barrel. Comes complete with all mounting hardware. Does not come with a gas tube.

Molded Delrin black cover that is 5 inches long and will fit any picatinny rail. Perfect for the four sided rail handguard. Each rail of the 16" four sided handguard takes one 5 inch cover, the 20 inch handguard takes two 5 inch covers per rail.

• Weight: 9.9 oz.

• No gunsmith installation. Simply install like factory plastic units.

• MIL-STD 1913 rails.

• Solid lock-up.

• T-marked for accessory location.

• Constructed of 6061 hard coat anodized for a lifetime of service.

• Grenade launcher or shotgun compatible with lower section removed.

• High quality at an affordable price.

• Weight: 16.0 oz.

• No gunsmith installation. Simply install like factory plastic units.

• MIL-STD 1913 rails.

• Solid lock-up.

• T-marked for accessory location.

• Constructed of 6061 hard coat anodized for a lifetime of service.

• High quality at an affordable price.

Finally an affordable picatinny front grip that attaches to any picatinny rail. This round handle is manufactured from a black synthetic composition. It is NOT a quick detach handle.

This machined rail fits all A-2 and M-4 Handguards and comes complete with mount hardware. 3 1/2 inches long, black matte aluminum.

The ‘all in one’ X3 is a triple rail system designed for the M16/AR15/M4 and enable the mounting of laser and delicate light systems on a secured and safe location above the barrel and by the front sight.

The X3 incorporates the world renowned ‘side by side’ picatinny rail mounted on the front sight with a 3rd rail aligned above the barrel.

The X3 rail system had been designed to fulfill the increasing demand for weapon mounted optical and laser devices.

Our product is of superb quality and with a secured, non-movable rail system that complies with MIL-STD 1913 the X3 ensures maximum accuracy and stability during the toughest workout of your weapon.

Features:

• Solid & non-movable once fitted.
• Three rails - two attached on the front sight and one rail aligned above the Barrel all to MIL-STD 1913.
• Safe position for delicate light & laser equipment.
• Easy to fit and dismantle.
• No Gunsmithing required.
• Manufactured from solid billet aviation aluminum

The X6 incorporates the world renowned ‘side by side’ rails, mounts on to the front sight of the weapon that provids a six rail system, compliant with MIL-STD 1913.

The X6 has been designed to fulfil the increasing demand for weapon mounted optical and laser devices. Our products are of superb quality and with a secure, non-movable rail system.

The X6 is the Ultimate Arms Accessory, ensuring maximum accuracy and stability during the toughest workout of your weapon.

Features:

• Solid & non-movable once fitted.
• 6 Rail feature – to MIL-STD 1913
• Matching height range to M16 flat top upper receiver rail.
• Twin rails attaching to front sight.
• 5 Bolt Secure system.
• No Gunsmithing required.
• Manufactured from solid billet aviation aluminium.
• Matching Plastic Covers for thermal isulation.

Vertical & Horizontal tactical grip, designed to the minuet ergonomic details to enable the shooter to transform horizontal grip to vertical grip in a second.

Features:

• Transforms a horizontal grip to a vertical grip for different shooting applications.

• Natural "fighting stance" hold on your rifle.

• Designed to mount on Picatinny or weaver rail.

• Easy to fit and secure.

• Secured locking implement.

• Reinforced plastic composite.

• Super light weight.

• No gunsmithing is required.

• Lifetime warranty.

Compact Picatinny rail system moulded from specially hardened plastic composite, to enable efficient attachment of a wide variety of devices.

Features:

• Easy to fit and secure.

• No gunsmithing required.

• Compliments a wide range of applications easily and securely.

Choice of Models:

• PR-A for short M16/AR15 with standard heat shield.

• PR-B for short M16/AR15 with thickened heat shield.

• SR-A for M16/AR15 to fit small devices (e.g. M3, M6) Thickened

• SR-B for M16/AR15 to fit small devices (e.g. M3, M6) Standard

Keep both hands free with this revolutionary Belt Clip. Secure device for mounted use on Picatinny Rail. Ideal for many accessories including flashlight.

Features:

• Exceptional design.

• 360 degrees rotating Picatinny Rail.

• MIL standard 1913.

• Strong and durable belt clip.

• Quick release mechanism.

• Special angle-lip design for easy slide in.

• Moulded from reinforced plastic composite.

• 2 size belt clip width 53mm & 58mm.

Features:

• 2 secured fittings for optical, laser & light equipment and any picatinny rail mounted device.

• Adaptor’s tight fitting ensures the stability and accuracy of all laser & optical devices.

• Milled by CNC and constructed of anodised aviation aluminium.

• Light, strong and durable.

• Easy to fit and dismantle. Secured by Allen bolts.

• No gunsmithing or any modification to the firearm is required (Except for the P90).

Features:

• Exceptional design detail.

• Choice of 2 sizes for different diameters, ľ” & 1” bore.

• Fits all types of Picatinny rails

• Efficient and easy to fit.

• Quick release mechanism.

• Special angle-lip design for easy flashlight slide in.

• Moulded from reinforced plastic composite.

This new TACTICAL PISTOL GRIP is sure to increase the performance of your rifle or carbine. Made from reinforced plastic composite, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet. The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold on your rifle. Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area. The AG-43 Grip Carries our Lifetime Replacement Guarantee!

Advanced ergonomically designed tactical light mount with multi use for a variety of torch lights.

Features:

• Built to enable front and rear flashlight operation.

• Specially designed ergonomically integrated forearm grip for steady and fast shooting.

• Smooth flat bottom for steady shooting when leaning on supporting surfaces.

• Designed to fit Picatinny rail.

• Easy to attach and operate.

• Special thermal insulation enables prolonged grip during continuous shooting.

• Built in cavity for pressure switch wiring.

• Designed for 1.0in or 2.76cm diameter.

Features:

• Designed for the secure fit of light & laser equipment, Bi-pods and any Picatinny rail mounted device.

• Adaptor's secure fit ensures the stability and accuracy of Bi-pods, laser & optical devices.

• Lightweight.

• Milled by CNC and constructed of anodised aviation aluminium.

• Easy to fit. Secured by Allen bolts.

• No gunsmithing or any modification to the firearm is required.

Tactical Ergonomic Foregrip with:

• Five position

• Glass-filled nylon

• Weatherproof

• Made in USA

• Lifetime warranty

• No gunsmithing

*Fits any standard picatinny rail

A shorter version of our highly regarded Intrafuse Standard Vertical Grip. This grip incorporates the same rugged durability, comfort and control in a more compact 3.125" package. Works on all standard Picatinny rails and offers the ability to remove an AK47 high capacity magazine without removing the vertical grip. Even in its reduced length it still retains storage capacity for one 123A battery.

The Intrafuse AR Handguard is designed to address the needs of every shooter - both civilian and tactical professionals. Constructed of high-strength composite, this handguard is extremely durable and offers a 50% weight reduction over comparable aluminum systems. The Picatinny rails located at 3, 6, 9, and 12 o'clock enables the shooter to moount vertical grips, flashlights, and aiming lasers to their weapon. Designed as a true modular system, our handguard includes covers for both the bottom rail and the side rails so you can configure the weapon to suit your needs. Uncover the rails you need to use and leave the cover on for the ones you don't. Numerous ventilation holes provide plenty of air circulation to reduce barrel overheating. Fits the standard carbine barrel configuration. Marked TAPCO and Made in the U.S.A. Fits the AR15 and M4 Carbines.

Advanced ergonomically designed tactical vertical grips

Features:

• Easy to fit and secure.

• Fits hand guards equipped with a Weaver or Picatinny rail system.

• Natural “fighting stance” hold on your rifle.

• Improved performance in reaction, “on target” time and muzzle control during rapid fire.

• No gunsmithing is required.

• Secure locking implement.

• Moulded from reinforced plastic composite.

• Super lightweight.

AR-15/M-16 Triple Rail Carry Handle Mount:

	Fits all AR-15/M-16 Standard Carry Handles
	Drop In Installation: secures With Thumbnut
	Stanag Compatible
	Triple Rails Accepts Weaver Style or Picatinny Mounted Accessories
	Matte Black Finish
	Machined Aluminum

AR-15/M-16 Flat Top 1" Scope Mount With Triple Rail System:

	Fits all AR-15 / M-16 Rifles with a Flat Top Receiver
	Built in 1" Rings
	Triple Rails Accepts Weaver Style or Picatinny Mounted Accessories
	Matte Black Finish
	Machined Aluminum

Precision machined with maximum strength.
Four mil-spec Picatinny rails for versatile accessory applications.
Simple and friendly installation, no gunsmith or tool required.
Solid locking features for most secure fit.
Ultimate tactical solution to enhance accuracy under toughest environments.
Fits CAR length model 4,15,16 and variants.
Hard anodized finish for wear resistance.
UTG rubber rail guard included for great comfort and protection.

• Precision machined with maximum strength

• Four mil-spec Picatinny rails for versatile accessory applications

• Simple and friendly installation, no gunsmith or tool required

• Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit

• Ultimate tactical solution to enhance accuracy under toughest environments

• 12" long top & bottom covers

• 27 slots on each side of Picatinny/Weaver quad rail

• Fits rifle length Model 4, 15/16 and variants

• Hard anodized finish for wear resistance

• 20 pieces of UTG rubber rail guards included for great comfort and protection

Two 45 degree Picatinny rails with removeable center rail for AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting lasers/flashlights/vertical grips/bipods. Fits both, standard & thickend heat shields
Made from reinforced polymer.

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for standard handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm

Robust gas block Picatinny quad-rail modular system to replace existing front sight and allows for versatile accessory applications. Machined from aircraft aluminum. Perfect fit with our solid front sight to retain your iron sights.

Six-Position Collapsible Stock with Adjustable Cheekrest, Buttpad and Pistol Grip

Note: AR-15 Stock Must Be Extended 3"to Operate Charging Handle
FITS : All AR-15 and Variants

Scopes & Mounts

Magazines & Accessories

Lasersights

Parts

Muzzle Brakes

Flashlights

Grips & Forends

Books & Videos

Samco AR-15/M16 Tactical Accessories

Picatinny Forearms, Mounts & Accessories