The Black Warrior heavy duty synthetic bipod is a lightweight bipod that attaches to the barrel instantly and will fit any small to medium barrel. The bipod is spring loaded so all you have to do is place it around the barrel and you have a dead rest. It is made in the USA from a high impact polymer resin that won't scratch your barrel. The legs lock together when not in use, which allows easy carry.

Fits a wide variety of guns - from AK to Winchester. It can be attached to any barrel with a diameter of .520" to .730". Cast aluminum with powder coated matte black finish. Features no-slip rubber feet, legs that fold when not in use, and everything needed for installation.

This quality M2 bipod attaches to the gas tube on the M1A/M14 rifle. The legs fold and extend for heavy duty use. The bipod is easy to install and replace and does not require you to modify your rifle at all.

As remarkable as the SnipePod is, there is one rule that must be followed. The SnipePod design is based on the principle of strength inherit to a triangle. Two of the sides of the triangle are actually the legs of the SnipePod. The third leg of this triangle is the ground or supporting surface between the two contact points of the SnipePods feet. As long as the feet have solid grip, the triangle works. However attempting to set the SnipePod on smooth slick surfaces will not allow the triangle to form, and the SnipePod will not "lock in". This eliminates smooth ice, tile floors, and the hoods of most pickup trucks. However, if you are a field hunter, you will not find this a limitation.

So if you are a serious hunter, and if you put in the miles, no other shooting support even come close to the flexibility and adaptability of the SnipePod. It must be experienced to be appreciated!

Versa-Pod is consistently recognized as the top choice amongst bipods by experts in the industry. A quick look through the features will tell you why:

	The only bipod that offers three different movements: Pan, Tilt AND Cant.
	Quick attachment and detachment. Allows the bipod to be carried separately in a belt pouch. Attaches instantly when needed. Also allows one bipod to be used between several rifles.
	One hand operation of leg adjustments. With other systems, one hand is needed to pull out the leg while the other hand tightens the locking collar. Versa-Pod’s one-touch operation allows you to lower BOTH legs in one motion and drop each leg to the desired height with your non-shooting hand.
	A logical system consisting of prone position bipod, sitting position bipod and shooting stick/monopod. All designed to use the same system of mounting adapters.
	A broad range of specially-designed mounting adapters for hard-to-fit applications: UIT (Anschutz) Rail, Freeland (American) Rail, Picatinny Rail and numerous others.

Model 1: Standard prone position bipod with “V” grooved metal feet for better weight distribution in soft ground. Raises barrel from 9” to12” in 6 increments. Aluminum and steel construction. Includes 1 Universal Mounting Adapter.

Model 2: Prone position bipod with non-skid, non-marring rubber feet. Designed for general purpose prone use as well as shooting form bench top.
 

It is designed to elevate your rifle so that you can shoot it from a sitting or kneeling position. Height adjustable from 15 1/2 to 23 3/4 inches in eleven (11) increments. Retains 1-piece leg construction for better stability. Aircraft-grade aluminum construction reduces carry weight (1 pound, 6 ounces with adapter) without sacrificing durability. Includes one (1) Universal Mounting Adapter, which mounts to any standard Q.D. sling swivel stud.
 

Universal Adapter: Attaches to virtually any firearm with a standard Q.D. sling swivel stud.

UIT Rail Adapter: Fits rifles with integral UIT (Anschutz) Rail.

Freeland Rail Adapter: Fits rifles with integral Freeland Rail (incl. McMillan Fiberglass,H-S Precision).

Picatinny Rail Adapter: Fits rifles with Picatinny Rail forends (Les Baer Custom AR-type rifles,Knight’s Armament Rail Systems, D.S. Arms FALs etc.).

Post-Ban AR Adapter: Fits standard M16A2 Lower handguard through vent hole. Note: will not fit M4 handguards with double heat shields.

Pre-Ban AR Adapter: Attaches to the M7 bayonet lug on pre-ban AR rifles.

Springfield M1A Adapter: Replaces the gas cylinder plug on M1A/M14 type rifles. Note: must be U.S. thread, not intended for metric thread gas blocks.

Ruger Mini-14 Adapter: Attaches to the gas block with two Allen-head screws (included).

Spotting Scope Adapter: Features standard 1/4-20 thread, enables steady hold of spotting scope without the need to carry a separate tripod.
 

The B-Square Bipod System is field ready and is THE perfect rifle rest and leveling device for every hunter and target shooting enthusiast! B-Square bipods install in minutes with no gunsmithing and are compact, lightweight, and completely weatherproof.

Harris Bipods clamp to any Quick Detachable Stud. They have strong recoil springs to prevent damage to the stock and maintain point of impact. Legs are adjustable for height. They are manufactured with heat treated steel and hard alloys with a black anodized finish. 

S-Series Rotate 45 degrees For instant leveling on uneven ground, hinged base with tension adjustment and buffer springs to eliminate tremor.

The bipods are quick detachable and clamp to the Q.D. stud of any rifle. Adapters are available for those rifles that do not have a factory installed Q.D. studs. Carrying with a sling or shooting off-hand is not impeded by the Bipod.

+ Durable triangular leg design + Legs extend quickly, easily and quietly
+ Adjustable telescoping legs offer great versatility in the field
+ Great for sitting, kneeling or standing shots + Built-in belt clip


This sturdy rest is a must have for hunters on the go. When quiet counts, be sure you have a Steady Pod on hand to provide you silent security when coming up on a trophy target. You’ll find its telescoping legs simple to use and strong from any position—standing, kneeling or sitting.

+ Fast, lightweight and easy to use
+ Two sizes to fit a variety of shooting situations
+ Sturdy construction for heavy barreled guns
+ Convenient belt pouch
 

+ Compact and lightweight + No assembly required
+ Telescoping legs have spring return + Extends quickly and easily
+ Easily attaches to sling swivel stud


Our Standard Bi-Pod offers shooters three length options in a portable, rock-solid rest. Whether you’re sighting-in your rifle sitting or kneeling in the field, you’re sure to find your mark with our easy-to-use rests.
 

+ Compact and lightweight + No assembly required
+ Telescoping legs have spring return + Extends quickly and easily
+ Easily attaches to sling swivel stud + Pivot allows for uneven terrain sight adjustments


These pivoting bi-pods are designed specifically for hunters who need a steady, portable and versatile rest out in the field. Available in three length options, you’re sure to find the right fit for your hunting situation. From sitting or kneeling to prone position, there’s a Pivot Bi-Pod for you.