The classic adjustable target sight, best suited for bullseye competition. The main housing, base and blade are all wire-EDM cut from bars of 4140 chrome-moly steel, heat treated to a range of HRc 28 to 32. Solid one-piece sight blade and specially hardened (HRc 60) hinge pin ensure a long service life. Fits the popular Bo-Mar™ BMCS™ sight dovetail

The general-purpose adjustable sight, suitable for daily carry or competition use. Wire-EDM cut serrations (not rolled on) on the sight blade drastically reduce glare, providing an excellent sight picture. Rounded corners on the sight blade and beveled edges on the base makes it better suited for concealed carry. The sight housing, base and blade area all wire-EDM cut from 4140 billets, heat treated to Rockwell "C" hardness between 28 and 32 for maximum durability. Specially-hardened (HRc 60) front hinge pin will not break. Fits the popluar Bo-Mar™ BMCS™ sight dovetail.

As rugged as any adjustable sight on the market today. Our precision wire-EDM process holds tighter tolerances than any of our competition, our heat-treatment process ensures that the sight starts out tight, stays tight. The specially-hardened (HRc 60) front hinge pin eliminates a common weak point on other makers' adjustable sights. No other manufacturer puts so much painstaking effort into making adjustable sights as we do, which is why our sights are known for providing years of reliable service.

Just introduced at the 2007 SHOT Show in Orlando. This may be one of the best all-around sights on the market. Highly visible white dots aid in quick sight alignment, while a precise wire-EDM sight notch allows for fine target work.

The ultimate target sight for bullseye competition. Tight part-to-part fit is ensured by our comprehensive use of the wire-EDM process to manufacture the major parts of our sight. Not only that, but the dovetail dimensions are extremely consistent (+/- 0.001"). The 0.020" deeper (than standard) sight notch makes for easier front sight acquisition and is preferred by many shooters.

A thoroughly updated, modern version of the classic target sight. The finely serrated, 45-degree beveled sight blade features a new, 0.020" deeper sight notch than the sight blades on our Models 860-002/860-003. Makes front sight acquisition that much faster, plus the large bevels on the sight blade obstructs less of the objects surrounding the target than conventional blade designs. The sight housing, sight base and sight blade are all heat-treated to a hardness range of between 28 to 32 on the Rockwell "C" scale. Our unique HRc 60 hardened front hinge pin has been tested to beyond 15,000 rounds without failure. The sight blade is wire-EDM cut from a solid blank of 4140 chrome-moly steel, thereby eliminating the weak point found in other, two-piece designs. Designed to fit the Bo-Mar™ BMCS™ sight dovetail.

A better choice than the original factory supplied sights on Para® and Charles Daly® 1911s. All three major components are wire-EDM cut from solid blanks of 4140 chrome moly steel, then heat treated to hardness range of HRc 28-32. We use a specially supplied hardened (Rockwell "C" hardness 60)dowel pin for the front hinge, thereby eliminating a major weakness common in other adjustable sights. Will also fit Springfield Armory®, Nowlin®, Olympic Arms® and High Standard® 1911 slides with adjustable sight cut.

Designed to fit the factory slide cut in Para® and Charles Daly® 1911s, will also fit Springfield Armory®, Nowlin®, Olympic Arms® and High Standard® 1911s with factory-supplied adjustable sights. The large beveled corners of the sight blade make for faster acquisition of the front sight. Fine serrations on the blade yield a crisp sight picture. Our manufacturing process using wire-EDM machines to cut blanks from solid 4140 steel, along with heat-treating the components to a range of HRc 28 to 32 ensure that the sight will be trouble-free in years of continuous use.

Newly introduced for 2006. Manufactured to the same high quality standards as our other adjustable target sights. Made to fit all Kimber® 1911s with the factory adjustable sight dovetail.

The no-nonsense adjustable sight, patterned after the style that was popular for years at Camp Perry. Same range of windage and elevation adjustments as conventional adjustable sights, but easier to carry. Can be mounted on the 1911 slide in the old National Match style that was popular in the early 1960s or, for carry use, mounted slightly forward of the rear edge of the slide using the Caspian Arms™ Rollo™ cut

All new, just introduced at the 2007 SHOT Show in Orlando. A low-profile, non-tritium version of our Defensive Adjustable Sight series. Fully adjustable for windage and elevation. Fits the existing Novak LoMount sight cut found on many 1911s (no extra machining is needed).

Our 860-817 adjustable sight was developed specifically for the Glock® pistols, with their fixed sight dovetail placed at the extreme rear of the slide. Ours is a clean-sheet design, not just a recycled sight from our parts bin. Knowledgeable shooters will note that our rear sight blade matches evenly with the rear of the slide on the Glock® pistol, not like other sights which extend 1/4" past the slide, making it easy to catch on clothing and gear. Suitable for Glock® Models 17, 22, 31, 34, 35 and 37, requires a taller (0.275" to 0.315") front sight

For the shooter who wants to explore the maximum inherent accuracy in his Ruger® .22 auto. Very distinctive clicks for both elevation and windage adjustments. Made with the same attention to detail as our 1911 sights. Large 45-degree bevels and fine serrations give a superior sight picture over the factory adjustable sight.

Newly introduced for 2007, our Model 860-323 is actually a re-creation of the 1960s-vintage KENSIGHT™. The windage adjustment mechanism is largely carried over from the popular ELLIASON™ sight, with the net effect being that the sight is a 4/5th scale of the more popular fully-adjustable sights common on 1911s. Extremely suited to custom "low-melt" installations where compact size is a primary consideration.

A small yet fully-adjustable combat sight made to fit in the standard Novak™ LoMount™ fixed sight dovetail commonly found on 1911s. These include Springfield Armory®, Colt®, Wilson Combat®, STI International®, Les Baer Custom®, Rock River Arms®, Dan Wesson® and many others. No additional machining of the dovetail is necessary. Small in size but very rugged owing to our wire-EDM and heat-treating processes

A brand-new version of our Defensive Adjustable Sight, now featuring a fully serrated sight blade without the relief cut. This sight picture is preferred by many. The sight housing, base and blade are all wire-EDM cut from bars of 4140, then heat treated to HRc 28-32. Our specially hardened (HRc 60) dowel pin is used in the front hinge. Fits the standard Novak™ LoMount™ fixed sight dovetail as found on Springfield Armory®, Colt®, Dan Wesson®, Rock River Arms®, Les Baer Custom® and numerous other 1911s. Will also replace Wilson Combat® and Heinie® fixed sights made for the Novak™ LoMount™ dovetail