Cold Steel > Hunting Knives

• CLD Bird & Trout 2.25" FIX W/SH/CH
• CLD Boar HTR 8.75 CEL FIX W/SH
• CLD Canadian Belt 4" FIX W/SH
• CLD Finn Bear 4" FIX BL W/SH
• CLD Master Series
• CLD Pendleton HTR 3.5" FIX W/SH
• CLD Pendleton Lite HTR 5.5" FB
• CLD Roach Belly 4.5" FIX W/SH

• BIRD & TROUT.
• Ultra-slim profile, all-steel construction.
• Features skeletonized handle for versatility & freedome of movement.
• Ring on handle allows knife to hang when not in use.
• Includes Concealex ® neck sheath & steel bead chain lanyard.
• Wt.: 0.8 oz.
• Blade thickness: 2.6mm.
• Blade: 2-1/4".
• Handle: 4-1/16"

(back to top)

---

• BOAR HUNTER.
• Blade made from Japanese AUS 8A stainless steel.
• Extra wide Celtic style blade, a sloping point, & hollow ground edge for piercing power.
• Handle has integral double guard & sub-hilt.
• Includes ambidextrous Secure-Ex ® sheath.
• Features Kraton ® grip.
• Wt.: 8.7 oz.
• 8-3/4" blade.
• OAL: 13-7/8 "

(back to top)

---

• CANADIAN BELT KNIFE ™.
• Blade made of 4116 Krupp Stainless steel & hollow ground to a razor edge.
• Elliptical profile is very efficient at reducing drag.
• Off-set Polypropylene handle snugly fits any hand.
• Includes pouch-style, black Cordura sheath to wear on belt or lanyard.
• Wt.: 2.2 oz.
• Blade thickness: 2.5mm.
• Blade: 4".
• O.A.L.: 8-1/2"

(back to top)

---

• FINN BEAR ™.
• Made out of 4116 Krupp Stainless steel & given an Rc hardness of 56-57 for holding a good edge/easy to re-sharpen.
• Blade shape is practical w/sturdy point for piercing & long belly for skinning, cutting, & carving.
• Straight, rib textured Polypropylene handle w/modified diamond cross section to fit hand like glove & accomodate wide variety of gripping methods.
• Includes deep pouch-style, black Cordura sheath to wear on belt or lanyard.
• Wt.: 2.8 oz.
• Blade thickness: 2.5mm

(back to top)

---

• COLD STEEL ®.
• MASTER HUNTER.
• Broad VG-1 San Mai III ® blade that's been flat ground to achieve the ideal blade cross-section & edge geometry.
• Spine is a full 3/16" thick to allow for necessary strength & stiffness to field dress and skin the biggest animals.
• Grip is specially designed to promote long use w/o fatigue.
• Made of shock absorbant, slightly tacky Kraton ® , it won't slip no matter how wet your hand gets.
• Conceal-Ex ™ sheath included.
• 4-1/2" Gut Hook for HTR+ & 4-1/2" Drop Point blade for HTR.
• 9-1/2 " O.A.L.

(back to top)

---

• PENDLETON HUNTER.
• Produced in collaboration w/Lloyd Pendleton.
• Unique drop point design makes field dressing/skinning chores easy.
• VG-1 Stainless steel blade has combination of thick spine for strength & deep, wide hollow grind resulting in sharp point for piercing.
• Thin, razor sharp edge is easy to re-sharpen.
• Features hand-contoured, shock absorbing, deeply checkered Kraton ® handle w/modest guard & thumb stop to facilitate many grip positions.
• Includes Secure-Ex ® sheath.
• Wt.: 5.8 oz.
• Blade thickness: 3/16 "

(back to top)

---

• Hunting/Utility knife.
• Features: 3-5/8'' Drop point blade; Hollowed bolster; Modest guard; Flared butt to aid retention.
• 4116 Krupp steel blade.
• Polypropylene handle.
• Includes Cordura pouch-style sheath.
• Blade thickness: 2.5mm.
• Wt.: 2.7 oz.
• OAL: 8-1/2''.

(back to top)

---

• ROACH BELLY ™.
• Short blade w/pronounced upswept curve & sharp point.
• Hollow ground blade made out of 4116 Krupp Stainless steel, heat treated to Rc 56-57 & given an easily maintained fine sharp edge.
• Polypropylene handle, impervious to the elements, won't swell, rot, shrink, or crack.
• Includes deep pouch-style, black Cordura sheath worn on belt or lanyard.
• Wt.: 2.6 oz.
• Blade thickness: 2.5mm

(back to top)

---

Copyright © 1999-2012 www.GunAccessories.com   All Rights Reserved.
Orders: 800-653-7890 Tel: 704-821-4679 Fax: 704-821-4644
CIE Global, PO Box 2490, Indian Trail, NC 28079
Order status? Orders@GunAccessories.com
Sales@GunAccessories.com