CALIPERS

Reloading ammunition requires attention to many critical cartridge dimensions, including case length, neck and base diameters, overall length, primer pocket depth, etc. Verifying these dimensions is quick and convenient with the Frankford Arsenal Calipers. The calipers are accurate to within one thousandth of an inch. The calipers allow you to measure inside and outside diameters, plus depths. You will find them useful for many measuring tasks on and off the reloading bench. Protective case included. Electronic model includes the battery.

Model

Description

516-503

Stainless Steel Dial Caliper

672-060

Economy Electronic Calipers

CASE NECK MICROMETER

Micrometers are normally used to measure bullets, expander balls and case head diameter, but have a variety of other uses around the workbench. These models feature a 1" capacity and will measure to one ten thousandth of an inch. Protective case included. Electronic model includes the battery.

Model

Description

107-083

Case Neck Micrometer

DS-750 DIGITAL SCALE

The Frankford Arsenal DS-750 delivers extreme accuracy for precise measurement of powder, bullets, cases or loaded rounds. With 1/10th grain accuracy you will be able to achieve the maximum potential of your handloads. An integrated clear plastic cover protects the scale during storage and transport. The large, high-contrast backlit display is easy to read. Simple controls allow for easy changes of units, tare weights or counting. Powder pan, carrying bag and calibration weight included. The performance and features of this scale make it a great value and will be a welcome addition to your loading bench. Capacity 750 grain (50 grams). Batteries included (2 AAA).

Model

Description

205-205

DS-750 Digital Scale

MICRO RELOADING SCALE

The Frankford Arsenal Micro Reloading Scale proves that great things sometimes come in small packages. While small enough to fit into your shirt pocket, this new electronic scale comes packed with all of the features that reloading demands. Capacity 750 grain (50 grams). Accurate within 1/10th grain. Battery included.

Model

Description

225-226

Micro Reloading Scale

BULLET PULLER

When you need to pull some bullets, for whatever reason, a hammer-type tool is the easiest method. Three different collets (included) allow you to pull just about everything from .22 Hornet to 45/70, rimmed or rimless. Bullet Puller Instructions.

Model

Description

836-017

Bullet Puller

737-910

Aluminum Bullet Puller Collets, Set of 3

CASE NECK LUBRICATOR

Using fine powdered mica to lubricate the inside of the case mouth is faster and more convenient than using a liquid lubricant. After the body of the case has been lubricated, simply dip the case mouth in the mica, run it over the brush and it is ready for the sizing die. Includes 1/10 oz. of fine powdered mica. Case Neck Lubricant Instructions.

Model

Description

132-530

Case Neck Lubricator

595-942

Mica - 1/10 Oz. Packet

757-780

Mica - 4 Oz. Jar

279-094

Mica - 1 lb. Jar

795-118

Replacement Brushes for Case Neck Lubricator - Set of 6

CASE LUBRICANTS

These convenient, fast-drying liquids provide quick lubrication of the case body before resizing.

Model

Description

460-478

Case Lube - 8 Oz. Spray Pump

POWDER FUNNEL KIT

Sixteen quick-change, caliber specific nozzles, 17-45 caliber, to minimize powder spillage. Also includes large funnel and extension tube. Packaged in plastic case with marked cavities.

Model

Description

832-516

Powder Funnel Kit

CARTRIDGE OVERALL LENGTH GAUGE

If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, 1/4" in diameter, or less. Simply install the appropriate size tip on the end of your cleaning rod, insert the cleaning rod to the bolt face, install one clamp, remove the bolt and drop in a bullet (projectile only) into the chamber. Hold the bullet against the rifling with a pencil, touch the bullet tip with the cleaning rod tip and install the other clamp. now measure the inside distance between the two clamps with a calipers and record, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles. Complete instructions included.

Model

Description

965-887

Cartridge Overall Length Gauge

Drop Out

The modern way to "smoke" out your bullet molds. Applied to the cavities of a cold, clean bullet mold, Frankford Arsenal Drop Out literally allows the just-cast bullets to "drop out" with no tapping or pounding.

Model

Description

763-758

Drop Out 6oz. Aerosol

CLEAN CAST LEAD FLUX

Lead fluxing made easy. No more using rosin, paraffin, tallow, bullet lube, and other homemade concoctions. CleanCast is nonsmoking, odor-free, and it really works. Only a small amount is necessary to prepare even a 20 pound lead pot for bullet production. Separates dross from your valuable bullet alloy and improves the consistency of the melted lead to eliminate variability during your casting session.

Model

Description

441-888

CleanCast Lead Fluxing Compound