 |
|
Here is a method of fuming with
cyanoacrylate fumes, instantly in the field. It is no longer necessary to
wait until you get back to the lab to fume evidence. After fuming, you can
use your Forensic Light Source with powders and dyes to further enhance the
latent prints. Use this glue fuming wand in conjunction with Redwop™,
Greenwopª, Blitz-Redª, Blitz-Greenª, Rhodamine, Ardrox, Basic Yellow 40, or
other powders and dye stains. If you don't have either type of light source,
you can always use regular or magnetic powders to dust the glue-developed
prints, just like you would with any other type of glue fuming you currently
do. Using this wand in a
fuming chamber is very effective and quick. The chamber fills with a high
concentration of fumes in about 30 seconds. The glue fuming wand can be used
the same way inside of a vehicle.
Each kit contains a self-igniting
wand with a protective cover, a can of refill butane, ten regular glue
cartridges, and a cartridge extraction tool, all within a sturdy case. The
wand can be heated for three to four hours on one filling of butane. Since
you are only using it for a few minutes per piece of evidence, a few hours
is a very long time. |
