Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush."

When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.

LP-1-0160

Magnetic Powder, Black, 1oz. (30cc in 90cc Jar)

LP-1-0161

Magnetic Powder, White, 1oz. (30cc in 90cc Jar)

LP-1-0164

Magnetic Powder, Silver/Gray, 1oz. (30cc in 90cc Jar)

LP-1-0165

Magnetic Powder, Bi-Chromatic, 1oz. (30cc in 90cc Jar)

LP-1-0170

Magnetic Powder, Black, 16oz. (480cc)

LP-1-0171

Magnetic Powder, White, 1oz. (480cc)

LP-1-0174

Magnetic Powder, Silver/Gray, 1oz. (480cc)

LP-1-0175

Magnetic Powder, Bi-Chromatic, 1oz. (480cc)

LP-1-0176

Magnetic Powder, Black, 128oz. (3840cc)

LP-1-0177

Magnetic Powder, Midnight (Jet) Black, 128oz. (3840cc)

LP-1-0178

Magnetic Powder, Bi-Chromatic, 128oz. (3840cc)

LP-1-0179

Magnetic Powder, White, 128oz. (3840cc)

LP-1-0180

Magnetic Powder, Silver/Gray, 128oz. (3840cc)