|
|
|
|
|
|
We are proud to feature the 100% U.S.A. made Precision Metalworks flash hiders. Each flash hider is carefully crafted to give maximum performance for your rifle. The Mini-14/30 flash hider and combo unit slips over the barrel and front sight and is held in place with a longer front sight pin (supplied). No modifications or gunsmithing is required. The Mini-14 flash hider with bayonet lug replaces the front sight assembly of the Mini-14 and will accept the standard M-16 bayonet. Will not fit the Mini-30 rifle. |
Mini-14 Flash Hider with Bayonet Lug - Blued |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
Express Sights
for Ruger Rifles provide all the advantages of Express AR-15 sights
to the Ruger Mini 14 family of rifles.
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
The Mini-14/30 T6 Stock
provides the shooter six positions to adjust the weapon to any body
frame. The SAW style pistol grip offers improved comfort and an internal
storage compartment capable of holding spare weapon parts or cleaning
supplies. Concealed beneath a removable cover, the forearm features
a Picatinny rail capable of mounting forward grips and bipods. The included
top barrel cover is equipped with an integrated rail designed to accept
any Picatinny/Weaver style scope rings.
|
||||||||
|
|
|||
|
|||
|
|
|||
| This peep sight replaces the coarse factory sight, with a precision repeat to zero windage and elevation adjustment system. The post front sight fits over the stock sight and pins into place giving a much crisper sight picture. | |||
 |
|||
|
|
|||
| FRONT SIGHT , Plain Post | $18.95 | ||
|
|
|||
|
Our Mount Fits the older Ruger Mini-14 Rifle
With a Serial number that begins with 180. THIS MOUNT WILL NOT FIT RIFLES
THAT BEGIN WITH 181 or HIGHER Serial Number. (You need mount #2270.)
The Scope Mount is a rock solid mount made in the U.S.A. and replaces
the rear sight on the Mini-14 Rifle. The mount accepts any weaver style
rings not supplied. We have Weaver Style 1" rings available for $9.95
a pair. The 180 Series Mini-14 Scope mount is precision machined from
T-351 Aircraft Aluminum. Item #2270-180 No gunsmithing or modifications to the rifle are needed |
|||
 |
|||
|
|
|||
| Ruger Mini-14 180 Series Rifle Scope Mount. #2270-180 | $64.95 | ||
|
|
|||
| Pair of Weaver Style Rings for 1 inch scopes | $9.95 | ||
|
|
|||
|
Our Mount Fits the Ruger Mini-14 Rifle With
a Serial number that begins with 181 and higher. THIS MOUNT WILL NOT
FIT RIFLES THAT BEGIN WITH 180- Serial Number. (You need mount #2270-180.)
The Scope Mount is a rock solid mount made in the U.S.A. and replaces
the rear sight on the Mini-14 Rifle. The mount accepts any weaver style
rings not supplied. We have Weaver Style 1" rings available for $9.95
a pair.The Mini-14 181 & Higher Series Scope mount is precision machined
from T-351 Aircraft Aluminum. Item #2270 No gunsmithing or modifications to the rifle are needed |
|||
|
|
|||
|
|
|||
| Ruger Mini-14 181 & Higher Series Rifle Scope Mount. #2270 | $64.95 | ||
|
|
|||
| Pair of Weaver Style Rings for 1 inch scopes | $9.95 | ||
|
|
|||
|
|||
|
|
|||
|
|||
|
|
|||
| Ruger Mini-14 / 30 Side Mount With Weaver Base - Black | $29.95 | ||
|
|
|||
| Ruger Mini-14 / 30 Side Mount With Weaver Base - Nickel | $34.95 | ||
|
|
|||
|
|||
|
|
|||
|
|||
|
|
|||
| Ruger Mini-14 / 30 4x20 Scope with Extras - Blued Steel | $69.95 | ||
|
|
|||
|
|||
|
|
|||
|
Fits Mini14/30 Ranch Rifles Only Increase your scope options when you install this lightweight, Weaver-style rail on your Mini-14/30 Ranch Rifle. Lets you mount mini or short- length scopes as well as Tasco PDP4 or Aimpoint red dots without permanent modifications or Gunsmithing. Keeps the scope low over the centerline of the receiver to maintain optimum eye and scope alignment. Multiple cross slots allow adjustment for maximum eye relief. Accepts all Weaver-style rings and accessories. 5" long, silver or Black, matte anodized finish, weighs 2.6 ounces. Perfect for using Trijicon and Bushnell Holosights. |
|||
 |
|||
|
|
|||
| MINI-14/30 Ranch Rifle Mount - Blue. No gunsmithing, fits factory dovetail slots on receiver. | $59.95 | ||
|
|
|||
| MINI-14/30 Ranch Rifle American Mount - Silver - For Stainless Rifles. No gunsmithing, fits factory dovetail slots on receiver. | $64.95 | ||
|
|
|||
|
|||
|
|
|||
| Ruger MINI-14 MODEL 181 & Later Scope Mount - With 1" Interlocking Rings. See-under type allows use of gun's sights. Standard dovetail base. Attaches by a single knob to the threaded cover plate. TO INSTALL: REPLACE THE BOLT STOP COVER PLATE WITH A SINGLE KNOB TO THE THREADED COVER PLATE. | |||
 |
|||
|
|
|||
| BSS14502 Blue Finish - Manufactured by B-Square | $89.95 | ||
|
|
|||
| BSS14506 Stainless Finish - Manufactured by B-Square | $99.95 | ||
|
|
|||
|
|||
|
|
|||
| Constructed of aircraft aluminum and built to last. Complete with well made 1" Weaver style rings. Allows use of the gun sight. Requires no gunsmithing. Does not mar the gun's surface and detaches quickly. Allows adjustments for elevation. | |||
 |
|||
|
|
|||
| MNT-214 Mini-14 Weaver Style Mount with 1” Rings | $35.95 | ||
|
|
|||
|
|||
|
|
|||
| Double mil-spec Picatinny rails for versatile accessory applications. Optimum profile with see-thru feature. Simple and friendly installation, no gunsmith or tool required. Complete with 1" weaver rings. | |||
 |
|||
|
|
|||
| MNT-214D UTG Mini-14 3-Point Locking Double Rail Tactical Mount | $41.95 | ||
|
|
|||
|
|||
|
|
|||
| 118mm long. 11 slots with grooved top for see-through capability. Complete with 5 screws and 4 screw holes with recess housing. | |||
 |
|||
|
|
|||
| MNT-22TOWL Weaver/Picatinny Style .22 Tactical Low Profile Mount | $7.95 | ||
|
|
|||
|
|||
|
|
|||
|
|||
 |
|||
|
|
|||
| MNT-HG214QR UTG Mini-14 Tactical Metal Quad Rails | $79.95 | ||
|
|
|||
|
|||
|
|
|||
| Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature - Each Rail with 5 Slots | |||
 |
|||
|
|
|||
| MNT-BR005 Deluxe Tri-Rail Barrel Mount | $24.95 | ||
|
|
|||
|
|||
|
|
|||
| Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature - Each Rail with 2 Slots | |||
 |
|||
|
|
|||
| MNT-BR002 Deluxe Tri-Rail Barrel Mount 2 Slots | $14.95 | ||
|
|
|||
|
|||
|
|
|||
| NEW GEN Golden Image Quick Aim Electronic Dot Sigth with Red/Green Dual Illumination and Integral Mounting Deck - Complete with Flip-open Lens Cover | |||
 |
|||
|
|
|||
| SCP-RD40RGW 30mm RED/GREEN DOT | $49.95 | ||
|
|
|||||||||||
|
The Mini 14 / Mini 30 Recoil
Buffer fits in the rear of the upper receiver, preventing the bolt carrier
from impacting the lower receiver. Installation takes less than a minute
and can be done without any tools. It's that easy. With the Recoil Buffer installed you have less felt recoil, more muzzle stability, less action noise, and extend the service of your weapon, not to mention the peace of mind that comes from protecting your investment while your enjoying it.
|
||||||||
Tactical Ergonomic Foregrip with:
*Fits any standard picatinny rail |
|
|||||||||
|
||||||||||
|
|
||||||||
|
|
|
|
|
|
|||
|
Lightweight with quick response. Special
molding design provides fantastic gripping from any point on the stock.
** Please note that lock arm stock's do not fold. It is 100% legal to install a lock arm stock on a post ban rifle manufactured after 9-13-94 provided that the rifle DOES NOT have a bayonet lug nor flashider. It is legal to have a lock arm stock and muzzle brake. |
|||
|
|
|||
| RAM14117 | Ruger Mini-14/30 Lock Arm Stock | $64.95 | |
|
|
|||
|
|
|
|
|
|
||||
| Ram-Line stocks are injection moulded and are strong & lightweight. Precision inletting, No gunsmithing required. Impervious to heat, cold and moisture. Free floating barrel design for increased accuracy. Comes with a Pachmayr Decelerator recoil pad and swivel studs. | ||||
|
|
||||
| RAM14125 | Ruger Mini-14/Mini-30 Carbine | Black | $69.95 | |
|
|
|
|
Mini-14 silent sling. |
| BW-1406 | Mini-14 Silent Sling - Black Warrior | $9.95 | |
|
|
|
|
| BW-1408 | Ruger Factory stripper clip Guidefor Mini 14 - Black Warrior | $9.95 | |
|
|
|
|
| BW-1413 | Mini-14 Handguard - Black Warrior | $24.95 | |
|
|
|
|
Allows the
shooter to utilize the stock in either folded or extended position.
The folding stock has a positive lock which works in both the closed
or open position. Available in Blued or Stainless finish to match your
rifle. |
| BCFS14B | Ruger Mini-14/Mini-30 (Blued) | $119.95 | |
| BCFS14S | Ruger Mini-14/Mini-30 (Stainless) | $129.95 | |
|
|
|
|
|
Extra
Control With Pistol Gripped shooting |
| BCRPS14B | Ruger Mini-14/Mini-30 (Blued) | $108.95 | |
| BCRPS14S | Ruger Mini-14/Mini-30 (Stainless) | $113.95 | |
|
|
|
|
| BP-69 | Deluxe Universal Metal Bi-pod-Mount on Swivel Stud or Clamp on Barrel | $49.95 | |
|
|
 |
|
Durable
and compact - a mere 4 5/8 inches and 6.5 oz |
| LT-TL101 | TACTICAL FLASHLIGHT W/INTEGRAL MOUNT | $49.95 | |
| The most striking feature
of the Muzzelite bullpup stock when it's attached to your action is
its overall length of 26-1/2". This allows you to carry a weapon with
much greater mobility. Whether your sport is hunting, plinking or serious
target shooting, the Muzzelite bullpup stock will convert a barrel heavy
long rifle to a compact weapon system in just a matter of minutes!
Please note:
|
|
||||||||||||
|
Temporarily Unavailable |
|||||||||||
|
|
The Mini-14 is the most versatile modern rifle--descended from the M1 Garand and M14, though with none of their faults--fitting the needs of homeowners, hunters, survivalists, law enforcement agencies and military forces equally. An infinite number of variations of the Mini-14 may be constructed with accessories such as scopes; magazines; folding, bullpup, and pistol grip stocks; multicaliber adapters; flash suppressors; silencers and slings. Presented here are the Mini-14's history, the factory produced models, specifications, accessories, suppliers and much more.
|
||||||||
|
|
If you own or work on Ruger Mini-14 rifles then you need the information contained on this video! Only AGI's armorer's courses instruct you in every aspect of maintenance and repair of your firearms. On this Video Master Gunsmith and Senior Instructor Robert "Bob" Dunlap teaches you: complete assembly and disassembly (not just field stripping), parts identification, proper cleaning and lubrication and step-by-step instruction in design, function and repair, including: sights, locking systems, magazines, sears, triggers, stocks, accurizing and accessories. The American Gunsmithing Institute's instructors are the best in the business. We adhere to the belief that you must fully understand how a firearm is designed to work before you can make any attempt to fix or repair it. AGI provides you with this knowledge.
|
||||||||
|
|
If you want to make your Mini-14 fit your body, needs and pocket book, Mini-14 Super Systems picks up where others have left off in showing you how to customize this inexpensive, reliable rifle into a super system weapon unlike any other. Firearms expert Duncan Long outlines the specifics of modifying the stock and barrel; creating a superaccurate target, sniper, or varmint gun. Here is the authoritative source on how to greatly, and legally, increase the mini-14's firepower, giving you a rifle that not only looks good, but delivers at the range, in the field, or for self defense.
|
||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
Copyright © 1999-2009 www.GunAccessories.com All Rights
Reserved. |
Requires
no drilling or taping to install
Built
in Mount and Bullet Drop Compensator
