Case trimming is no longer a drudgery. Trim cases simply, with a few turns of the handle. The Trim Pro's spring-loaded level shell holder eliminates the muscle fatigue associated with long hours of tightening a T-bar. The Shell Holder keeps cases securely locked in place and aligned with the cutter. Works with standard pilots and features a micrometer fine-adjustment bushing calibrated for setting exact trim length. Made of die cast metal with hardened cutting blades for a lifetime of reliable use. Includes: Shell Holders: 2, 3, 4 and 10. Pilot calibers: 22, 24, 25, 27, 28, 30, 35, 44 and 45.

You'll actually look forward to case trimming. A low RPM motor delivers plenty of torque. The spring-fed cutter is easy and accurate. No pushing or feeding pressure is needed, leaving your hands free for deburring or other tasks. A positive locking handle and integral power switch makes it simple and safe. Includes: Shell holders 2, 3, 4 and 10. Pilot calibers: 22, 24, 25, 27, 28, 30, 35, 44 and 45.

Case preparation just became five times easier and faster with the Trim Mate Case Prep Center. Five gear-driven rotating heads turn the tedious task of chamfering, deburring, primer pocket cleaning, military crimp removal and flash hole deburring into child's play. The tough, high-torque motor does all the work, allowing you quick case movement from station to station. There are also two stationary positions for case neck brushes or other useful accessories and a cupped area for securing dry case neck lube. The Trim Mate Case Prep Center includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube. There are also a number of optional accessories available.

Primer Pocket Uniformers are manufactured with carbide cutters and true the primer pocket depth. Military Crimp Removers are made with hardened steel cutters and ream out the crimp ring found in military cases.

Raise your manual case trimmer to new heights with the Trim Pro stand. Provides more working room and hand clearance. Also provides convenient storage space for Trim Pro shell holders and pilots. Stand mounts easily on accessory base plate or directly on a bench. Dimensions: 4 7/8" x 8 5/8" x 1". Manual trimmers only.

Shell Holders and Pilots sold separately.

Two tools for fast, easy removal of excessive neck thickness or variations in case thickness. They guide the cutter over the sized cartridge case neck and are supported by the special pilot/reamer. The inside and outside of the neck are turned simultaneously. The Auto Feed Attachment (for Case Trimmer-2 and Trim Pro Manual Case Trimmer) advances the cutting tool evenly over the case neck with each turn of the trimmer handle.

Not to be used with Trim Pro Power Case Trimmer.

Upgrade your Rotary Case Trimmer-2 simply by adding this lever-handle shell holder system. Makes case trimming faster and easier than using the old collet system. It's also more accurate because the case is perfectly aligned.

Uses Trim Pro shell holders.

This is automated case preparation at its finest. Our 3-Way Cutter is one of those accessories you can't live without. Its unique three-blade head configuration trims cases like our standard cutting tool, but in addition to trimming to length, inside blades chamfer the case while an outside blade deburrs it. The three-way cutter attaches easily to either Trim Pro case trimmers.