RCBS Powder Handling

PowderMaster™ Electronic Dispenser

Never before have handloaders had such fast, accurate, convenient and repeatable powder dispensing as they do now with the RCBS PowderMaster. Working as a team, the PowderMaster and Powder Pro utilize infrared light waves to communicate precise powder measurements, so dispensing is exact and effortless. No more timely scooping or trickling kernel by kernel. The PowderMaster delivers total accuracy at the simple push of a button. Just fill the hopper with powder and push calibrate. As the dispenser feeds to the scale, the Powder Pro Scale electronically communicates powder flow rate back to the dispenser allowing it to calibrate. Once the PowderMaster is calibrated all you have to do then is enter the desired charge weight and press dispense, the powder quickly flows automatically into the pan with accuracy of 0.1 grain.

Shown with Powder Pro

Requires RCBS Powder Pro Digital Scale

RCB98999

PowderMaster Electronic Powder Dispenser (120 VAC)

$303.95

Charge Master Combo

The ChargeMaster 1500 Scale and ChargeMaster Dispenser
together form an unmatched combination of speed and accuracy. There is no longer a need for timely calibration to the type of powder being used. Simply fill the 1 lb+ capacity powder hopper with smokeless powder, enter the desired charge and press the dispense button. Average dispensing time is approximately 20 seconds for a 60 grain extruded powder charge. Dispensing can be done in grains or grams mode. Accurately weighs and dispenses all extruded (stick), ball (spherical) and flake smokeless powder from 2.0 to 300 grains to +/� 0.1 grain. You can store up to 30 of your favorite loads in memory for fast easy recall. The front to back layout allows easy access to the scale pan by right or left handed users. The clear cover eliminates fluctuations in weighing caused by air currents without obscuring your view of the charge being dispensed. The powder drain feature allows for convenient and easy emptying of the powder hopper. Power to the Dispenser is provided by the connection to the ChargeMaster 1500 scale so there is only one power cord to manage. The ChargeMaster 1500 Scale and Dispenser can be purchased separately or as a Combo set. (Note: Use with smokeless powder only. Do NOT use with black powder!)

RCB98923

Charge Master Combo

$386.95

RCB98922

Charge Master Dispenser

$218.95

Electronic Powder Trickler

The new RCBS Electronic Powder Trickler offers the reloader an economical way to automate and speed up his reloading. Similar in concept, but less expensive than the Powder Master Electronic Powder Dispenser, the Electronic Powder Trickler automatically finishes off the powder charges with extreme accuracy. The Electronic Powder Trickler works in partnership with the Powder Pro Electronic and the RCBS Uniflow Powder Measure. The user establishes the desired powder charge by manually adding powder to the scale pan until the scale displays the desired weight. Pressing the "memorize" button on the trickler enters the weight displayed on the scale into the trickler's working memory. The Uniflow Powder Measure is set to throw a charge slightly less than the desired charge.

With this easy preparation complete, the user simply throws the light charge from the Uniflow into the scale pan, places the scale pan on the Powder Pro Electronic Scale. The trickler automatically adds powder to the pan until the memorized weight is reached and then shuts off.

Must be used with Powder Pro Digital Scale.

RCB98996

Electronic Powder Trickler 120-VAC

$248.95

Uniflow™ Powder Measure

The number one choice of reloaders the world over, our Uniflow Powder Measure has an adjustable cylinder. Iron and steel construction insure long life and accuracy. You can throw charges from 0.5 grains of Bullseye to 110 grains of 4350.

The Uniflow Powder Measure saves the time of weighing each charge and performs two powder charging tasks in one fast, simple operation. With each turn of the handle it accurately measures powder -- within a fraction of a grain -- and swiftly dispenses it into cases, one after another. Powder pours uniformly from the powder hopper into the measuring cylinder, through the drop tube and into the case.

An optional 17 caliber drop tube is available.

Shown with Powder Measure Stand.

RCB09010

Uniflow Powder Measure

$99.95

RCB86880

Dust Cover

$12.95

RCB09004

Small, Measure Cylinder Assembly

$39.95

RCB09028

17 Caliber Drop Tube

$9.95

Powder Measure Stand or Piggyback Stand

This stand will raise any powder measure (with standard 7/8" x 14 thread) leaving plenty of space for positioning a powder scale pan or cases in a loading block under the drop tube. Bolts easily to a reloading bench or table. Also serves as a stand for holding a Piggyback II when not in use.

RCB09035

Powder Measure / Piggyback Stand

$34.95

Powder Baffle

Uniform loads require consistent powder charges, and many handloaders find a baffle helps them throw more consistent charges. The baffle is specifically designed for the Uniflow Powder Measure and provides handloaders a uniform powder flow by controlling the gravity feed pressure of the powder column on the metering unit.

RCB90225

Powder Baffle

$9.95

Micrometer Adjustment Screw for Uniflow Powder Measure

The secret to faster reloading -- go by the numbers. Add the UPM Micrometer to your Uniflow Powder Measure, and you can record precise settings for your powder charges. Determine the load number and dial it in -- time after time. An easy installation too; it simply replaces the Uniflow's standard metering screw.

Large fits a measuring cylinder with a 11/16" diameter metering chamber.

Small fits a measuring cylinder with a 1/2" diameter metering chamber.

RCB98901

Large UPM Micrometer Adjustment Screws

$54.95

RCB98902

Small UPM Micrometer Adjustment Screws

$54.95

Competition Powder Measure

The Competition Powder Measure starts with the proven Uniflow Powder Measure with its precision ground metering drum and honed main casting. RCBS then adds a powder baffle and UPM Micrometer Adjustment screw. The Powder Baffle controls the powder flow and the pressure of the powder column on the metering unit. The UPM Micrometer Adjustment screw allows precise adjustments to the metered charge as well as allowing you to record the number for future reference and reuse. Handle placement can be used on the right or left side simply by changing the orientation of the metering drum. The powder measure will accurately meter, by volume, all types of smokeless powder � ball, flake or cylindrical (stick). The Rifle unit meters volumetric powder charges from 10-110 grains. The Pistol/Small Rifle unit meters volumetric powder charges from .5 to 40 grains. The Combo unit includes both the Rifle and Pistol metering drums and complete UPM Micrometer Adjustment screw assemblies. NOTE: All powder measures should be used in conjunction with an accurate powder scale to set the desired charge and to occasionally check charges during the reloading process.

Not for use with Black Powder.

RCB98908

Pistol/Small Rifle

$159.95

RCB98909

Rifle

$159.95

RCB98910

Combo

$209.95

Accessories Kit

This package makes reloading even easier with some nice tools. The Reloading Accessory Kit includes: Powder easure/ Piggyback Stand, Powder Trickler, Primer Pocket Brush Combo, Case Loading Block, Stainless Steel Dial Caliper, small and medium size Case Neck Brushes.

RCB98925

Accessories Kit

$139.95

Case Activated Linkage Kit

Convert the Uniflow Powder Measure (not included) for use on most four or five-station progressive presses. The Uniflow Powder Measure can have the regular Measuring Screw or the optional Micrometer Adjustment Screw installed, depending on your preference. Three powder bushings are included for most popular rifle and pistol calibers: Small Rifle for .22 through .270 calibers, Large Rifle for 7mm through 45 calibers and Pistol for .32 through .45 calibers. The powder bushings are designed to eliminate powder spillage around the case mouth. Fully adjustable for all of the different variations in case length.

RCB98911

Linkage Kit

$79.95

Powder Funnel

We've even managed to improve upon the basic plastic funnel. Features include a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, plus a square lip to keep the funnel from rolling around.

RCB09087

Powder Funnel, 22 to 45 Cal.

$5.95

RCB09086

Powder Funnel, 17 Cal.

$7.95

Little Dandy™ Pistol Powder Measure

Perfect for handloading pistol shooters and select small-caliber rifle shooters. There are 28 interchangeable fixed-charge powder rotors available and you can load any popular powder with the Little Dandy in up to 400 different load combinations. There's no readjustment needed after changeover. Can be used hand-held or as conventional bench-mounted tool with optional Powder Measure Stand.

RCB86040

Little Dandy Pistol Powder Measure

$42.95

Little Dandy™ Rotor Knob

Attaches to the Little Dandy rotor with a setscrew, making the rotor easier to turn. Crafted of high-strength aluminum with knurled outer surface for maximum finger-touch control.

RCB86046

Little Dandy Rotor Knob

$5.95

Powder Trickler

Here's the fastest way to feed powder to your scale. Turn the small knob and powder trickles into the pan one kernel at a time. Large-capacity reservoir, extra-wide base for stability, and a perfect height for all powder scales.

RCB09094

Powder Trickler

$19.95


Reference Software	Reloading Scales	Shell Plates
Reloading Presses	Bullet Casting	Miscellaneous Accessories / Extras
Case Preparation	Misc. Bullet Moulds	X-Dies
Case Trim Tools & Accessories	Rifle Bullet Moulds	Competition Rifle Dies
Priming Tools & Accessories	Pistol Bullet Moulds	Group A Dies
Powder Handling	Cowboy Bullet Moulds	Group B Dies
Group C Dies	Group D Dies	Group E Dies
Group F Dies	Cowboy Dies	Reloader Special Dies
Shotshell Dies	Little Dandy Powder Rotors	Expander Decapping Units
Group G Dies	Group H Dies	Grand Bushings
Miscellaneous Dies & Parts

						Product Quick Search:

Product Quick Search: