Your choice of reloading dies should not be a casual one. Your dies literally shape the quality and function of your reloads. Because they are so important, we give them a lot of attention.

	We use the finest alloy steels obtainable.
	Our dies are machined on Super-Precision® lathes capable of holding the tightest tolerances in the industry.
	This allows us to guarantee that they will produce ammunition that will properly fit any standard (SAAMI) chamber, regardless of action type.
	To maintain the critical tolerances and guarantee that your dies will last a lifetime, Redding dies are carefully heat treated in atmospherically controlled furnaces.
	Finally, your dies are hand polished inside and out for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
	The die box is a handy cartridge loading block and storage package. Inside are storage locations for a spare decapping pin and hex wrench (both included), and even a place for your shellholder!
	All Redding dies have industry standard 7/8-14 threaded bodies.

Die Sets For Botttleneck Cases
Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimping ring and the proper seating plug.

Neck Die Sets For Bottleneck Cases
Neck die sets for bottleneck cases contain two dies. The neck (NK) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built in crimp ring and the proper seating plug.

Deluxe Die Sets For Bottleneck Cases
Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of our full length die sets (described above) with the addition of a neck (NK) sizing die.

Die Sets For Straight Wall Cases
Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation.

The full length (FL) resizing die contains a decapping rod assembly. The expander die (EXP) contains a neck expanding plug. The seating die (ST) includes bullet guide, built-in crimping ring and the proper seating plug.

Seating Dies With Taper Crimp
Reloading dies for handgun calibers that headspace on the case mouth are indicated in the charts below with a . The seating dies in these calibers are made with a taper crimp. All other calibers have the standard roll crimp. Recent tests have shown that seating the bullet to its proper depth and crimping as a separate operation will produce the best accuracy.