With decades of experience designing homeland defense products for the Israeli military, First Samco and Fobus are pleased to expand their product line. In today's world, First Samco products have become very important to Civilian, Law Enforcement, and Military groups all over the world. Their recent focus has been on the development of an innovative mounting system for the M16 - AR15 along with popular accessories to compliment the M-33 handguard.

Built to military specifications for the M16/AR15. The M44 incorporates 4 mounting rails allow the use of any accessory with a Picatinny or Weaver® base, including lasers, lights, optics and bi-pods. The operator will not notice additional bulk or weight as the rails are designed to be an integral part of the handguard. Thermal rubber rail covers enhance the operator’s grip and protect the rails when not in use. A metal heat shield dissipates the high temperatures produced during sustained rapid fire sequences. The carbine length (M44S) is currently available. No tools or gunsmithing required for installation.

Built to military specification, the M-33 will fit all M-16/AR15 style carbine rifles. Produced from special high density polymers injected into ultra precision molds, with rails molded directly into the handguards top and bottom halves. The rails will accept any accessory with a Picatinny or weight added to the handguards. Lasers, lights, optics, bi-pods, and other mission specific accessories can be easily mounted on the rails. A sliding cover is provided to protect the rails when not in use and enhance the operator's grip upon the handguards. The use of a stainless steel heat shield within the M-33 handguard acts as a heat sink to dissipate the high temperatures encountered during sustained rapid fire sequences.

The First Samco Vertical Grip was developed to fit handguards equipped with a Weaver or Picatinny rail system. Use of the VERTICAL GRIP will allow a natural "fighting stance" hold on your rifle. By positioning your hands with one on the pistol grip and the other on the VERTICAL GRIP, improvement in both the reaction time needed to get "on target" and muzzle control during rapid fire will be noticed. The VERTICAL GRIP may be positioned, and held firmly, on the rail by simply pressing the lock button and sliding the GRIP to the intended location and then releasing. No tools or gunsmithing required for installation.

The First Samco Tactical Hand Grip is sure to increase the performance of your rifle or carbine. Made from their own proven synthetic materials, it incorporates finger swells and a backstrap that is designed with surfacing to enhance your grip and minmize the chance of slippage should the G-27 become wet.
The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold upon the G-27, while protecting the web of your hand . Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area. The Tactical G-27 is designed to be ambidextrious and installs quickly. The Grip carries the First Samco / Fobus Lifetime Replacement Guarantee.

Fobus USA, First Samco Tactical Accessories for Flashlight Mount Scorpion/Stinger for Picatinny and Weaver Rail Systems.
Scorpion or Stinger flashlight Mount on all Picatinny and Weaver Rail Systems

Developed to fit handguards equipped with a Weaver or Picatinny rail system.
Use of this MOUNT allows the attachment of a bipod, or any other piece of equipment, requiring a mounting stud.
The MOUNT may be positioned, and held firmly, on the rail by simply pressing the lock button and sliding the MOUNT to the intended location and then releasing. No tools or gunsmithing is required and quick removal to allow installation of another rail mounted accessory is easily accomplished.

The First Samco Mag Coupler joins two magazines for the .223 M16/AR15 for greater ammunition capacity. It holds the magazines with rock like strength and will not scratch or deform mags. These are standard issue for the Israeli Military and can be used in either a parallel or staggered position. Lightweight and fiberglass reinforced with the Fobus / First Samco Lifetime Warranty!

Provides a brightly colored visual signal indicating the chamber is unloaded. Fits into the barrel and seals the chamber. Allows the firearm to be used for instruction without a live round being inadvertently chambered.
Available for 9mm, .40 cal and .45 cal handguns*, 223 rifles & more. *Removal of handgun slide is required in most cases.

Two 45 degree Picatinny rails with removeable center rail for AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting lasers/flashlights/vertical grips/bipods. Fits both, standard & thickend heat shields
Made from reinforced polymer.

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for standard handguard of M16/AR15, but can fit various weapons at small modification. Length: 6 inches/15.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm

Transform your gun to a weapon capable of mounting various devices with our Picatinny/Weaver Rail. Molded from hardened polymer composite. Easy to fit. No Gunsmithing required. Designed for thick handguard of M16/AR15, but can fit various weapons at small modification. Length: 1.75 inches/4.5cm