GunAccessories.com
Home Search Shopping Cart Order Info Email
Ruger 10/22 Accessories Ruger 77-22 Accessories
Ruger 10/22 Magum Accessories Remington 597 Accessories
Ruger MKII and 22.45 Accessories Miscellaneous Accessories

RUGER MKII and 22/45 Accessories

MKII Accurizing Performance Kit

Complete, five-piece drop in kit designed to provide a crisp, clean 2.25 lb trigger pull (trigger pull may vary slightly due to factory frame variances). The kit includes our target hammer, target sear, wide target trigger w/ overtravel screw, return trigger plunger spring and polished plunger. No stoning required. Fits Ruger MKII and 22/45.

MKII Accurizing Performance Kit

$119.95

MKII Exact Edge Extractor

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges "roll over" and actually cause extraction problems after a short period of use. Our extractor features a very precise "hook point." It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM mfg process. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available.

MKII Exact Edge Extractor

$14.95

MKII Ext Bolt Release (Black)

Replaces the factory bolt release in minutes and provides a .375" serrated face for ease of releasing bolt.

MKII Ext Bolt Release (Silver)

$14.95

MKII Ext Bolt Release (Black)

$14.95

MKII Scope Mount

Weaver style scope mount featuring six cross-slots to allow for the mounting of most red dot optics. Requires three drilled & tapped holes on receiver. It will fit in factory pre-drilled Ruger MKIIs.
Product specifications: Aluminum, weighs 1.8oz, 4.6" long

MKII Scope Mount (Black)

$36.95

MKII Scope Mount (Silver)

$36.95

MKII Target Hammer

Hardened, precision-ground, drop-in hammer designed to reduce trigger pull. The hammer is precision surface ground on the hammer notch for optimum performance. It is also designed to reduce locktime.
Product specifications: Made of stainless steel, Rc 56-58 - Fits Ruger MKII and 22/45

MKII Target Hammer

$54.95

MKII Target Sear

This specially designed sear gives the shooter a shorter, faster, cleaner breaking pull. The mating surface is precision surface ground.
Product specifications: Made of stainless steel, Rc 56-58 - Fits Ruger MKII and 22/45

MKII Target Sear

$28.95

MKII Target Trigger

The stainless steel extra wide trigger improves trigger control. An overtravel adjustment screw is installed. It comes with a reduced trigger plunger spring.
Product specifications: Made of stainless steel, .500 wide on trigger face - Fits Ruger MKII and 22/45

MKII Target Trigger

$34.95

MKII TL2000

Precision machined to ensure accurate, repeatable click adjustments for windage and elevation. It is fully compatible with the factory front sight on MK I and Mark II pistols. No fitting required, uses factory dovetail; locks in place with two set screws.
Product specifications: Made of steel, rear sight notch width .110", Fits Ruger MKII (replaces factory rear adjustable sight)

MKII TL2000

$89.95

MKII V-Comp

Large, single chamber compensator with six separate ports gives controlled release of muzzle gas for almost recoil-free rimfire shooting. Inner, rubber O-ring gives positive gas seal. Installs easily by removing factory front sight and using existing hole.
Product specifications: Machined steel, stainless steel or matte black, available with or without front sight, weighs 4oz Fits Ruger MKII and 22/45 models with .875" bull barrel (4", 5.5", or 6.875"). It does not fit the 10" model.

MKII V-Comp (Black)

$64.95

MKII V-Comp (Silver)

$64.95

MKII V-Comp for Slab Side

CNC machined contour designed specifically for the slab side contour. It features an inner, rubber O-ring to provide a positive gas seal. The O-ring in addition to the six ports provides the shooter with recoil free shooting. Installs easily by removing the factory front sight, slide the new V-Comp on and install using the supplied screw in the existing factory screw hole.
Product specifications: CNC machined stainless steel, includes front target sight, weighs 4.4oz Fits the Ruger MKII Competition Model Slab Side

MKII V-Comp for Slab Side

$94.95

MKII V-Comp for Slab Side (no front sight)

CNC machined contour designed specifically for the slab side contour. It features an inner, rubber O-ring to provide a positive gas seal. The O-ring in addition to the six ports provides the shooter with recoil free shooting. Installs easily by removing the factory front sight, slide the new V-Comp on and install using the supplied screw in the existing factory screw hole.
Product specifications: CNC machined stainless steel, Does not include front sight or dovetail designed to be used with optic, weighs 4.4oz Fits the Ruger MKII Competition Model Slab Side

MKII V-Comp for Slab Side (no front sight)

$94.95

MKII Volthane Grips

Target grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold.
Product specifications: One-piece rubber grip, includes four allen head screws and washers - Fits the Ruger MKII only.

MKII Volthane Right Handed Grips

$49.95

MKII Volthane Left Handed Grips

$49.95