Universal Bench Block

For firearm assembly and disassembly, the Universal Bench Block is your best friend. It features a variety of notches, grooves, and holes on both sides and is ideally suited for M1911-style pistols. Need to install a pin, detent, or spring? The Universal Bench Block is the answer. 1-5/16" high, 4" in diameter. Non-marring urethane for long use.
 

Model

Description

672-215

Universal Bench Block

Hammer and Punch Set

The Wheeler Hammer and Punch Set combines a three face hammer "brass, steel and polymer" with a brass drift and 6 steel punches. It comes in a handy closed-top carrying box. It makes a great tool for driving pins, drifting sights, at the shooting range or on your gunsmithing bench.
 

Model

Description

951-887

Hammer and Punch Set

Nylon/Brass Hammer

Likely to become your favorite hammer at the bench or on the range. Nylon face is non-marring and is great for alignment and other uses where a steel hammer is not appropriate. Brass face can be used for driving pins and punches, and a multitude of other uses. 11" overall. Weighs 8 oz.
 

Model

Description

711-016

Nylon / Brass Hammer

Punch Sets

Quality crafted Steel and Brass Punch Sets assist the gunsmith in assembly and disassembly of all kinds of firearms. Reduce the chances of marring and burring that can occur with improperly sized or makeshift punches. Both Steel and Brass Sets contain eight precision crafted pin punches in sizes you can use. The larger non-marring brass punches are particularly useful for drifting sights. Handy rollup pouch keeps your punches clean and in order. Overall length 4".

Steel: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"

Brass: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"
 

Model

Description

780-194

Brass Punch Set

715-055

Steel Punch Set

Letter & Number Stamp Set

While it's especially useful for marking caliber designations on barrels, you'll find that you can mark tools, keys and other metal items with these 1/16" high stamps.
 

Model

Description

194-679

Letter and Number Stamp Set

Liquid Applicator Brush

These 100% natural bristle brushes are the perfect tools for application of small amounts of lubes, solvents, Heat Control Paste, blue and rust removes, fluxes, and other liquid products in the shop. Each brush features a 1/2" wide head, bright metal handle, and is 6" in overall length.
 

Model

Description

836-940

Liquid Applicator Brush - 12 Pack

Stainless Steel Picks

You'll wonder how you ever got along without these handy tools. Useful for a variety of functions including assembly and disassembly of firearms (especially helpful for hooking and unhooking springs), scraping dirt and residue from hard to reach places, scribing lines in both metal and wood, etc. Four separate double-ended tools offer eight distinctly different picks to accommodate your needs.
 

Model

Description

324-770

Stainless Steel Picks - Set of 4

356-830

Shooters Swabs, 100

Cerama-Coat

Wheeler Engineering's Cerama-Coat is a spray-on metal finish that brings new life to old guns without expensive airbrushes or painting equipment.

This one-can solution is the toughest metal finish available. This is an ultra-modern formula that contains a ceramic matrix, giving the finish ultimate durability, wear-resistance, and protection against rust and solvents. The matte black color won't spook game and looks greaet on any gun.

Applying Cerama-Coat is easy! Degrease the item to be coated, shake the Cerama-Coat can vigorously and spray the parts with three light coats of finish. Bake the part in an oven at 350 degrees for one hour to cure the finish, and you'll have a finish ready to take the very worst that mother nature can dish out. Each can contains enough to refinish two long guns. Not for use on wood, plastics, or scopes.
 

Model

Description

468-993

Cerama-Coat