|
| Sports Shooting, Hunting and Target Shooting
Our gun sight
coatings are designed and manufactured
to provide a high visibility contrast between the front and
rear sights and an equally strong contrast between
firearm and target. Shoot better with bright sights! |
 |
|
|
 |
Military, Law
Enforcement, Tactical Shooting
High stress threat management requires
faster target acquisition. A strong color contrast puts your front
sight on the target quicker. Proper color contrast on the gun sights
allows faster sight allignment.
Shoot better with
bright sights! |
|
|
| Coating
Application Instructions
-
Remove all gun oil from sights
with Bright Sights Gun Sight Cleaner repeat process and then dry
thoroughly using clean soft cloth.
-
Shake coating vial well.
-
Dot Sights - Take the small
Bright Sights Applicator and dip into coating vial, place a small amount
of coating on the tip of the applicator stick and gentle place a small
amount of coating onto the gun sight to form a small dot. Repeat process
to increase dot size.
-
Bead, Blade or Ramp gun sights
- Take a small amount of coating by carefully dipping the Bright Sights
Brush in the vial. Gently apply the first coating to the sights and repeat
process. Several small layers of coating is better than one layer of
coating. Combining the Bright Sights® High Visibility coatings and the
Ghost Glow™ coatings, we suggest mixing them on a small piece of plastic
or paper outside of each vial prior to application. Once the coatings are
combined, eg : Bright Sights Green with Ghost Glow Green then the same
application process will apply to the mixed coating.
-
Close container/vial do not
let the product dry in the bottle.
-
Clean up using a damp cloth.
-
Allow your gun sights several
hours to dry prior to using the firearm. Full cure requires 48 hours.
|
