YOUR SHOTSHELL FACTORY

If you're an avid trap, skeet or sporting clays shooter or a devoted bird hunter, the 366 Auto is the machine you need to turn out low cost reloads in a hurry.

It's easy. All you do is set in an empty case and wad, and then pull the operating lever. Everything else is done for you-automatically. Every stroke turns out a precisely crimped shell, fully resized to factory dimensions.

The 366 Auto features full-length resizing, automatic primer feed, swing-out wad guide, three-stage Taper-Loc crimping, automatic advance to the next station and automatic ejection. Additional die sets are available in 12, 20, and 28 gauge.

We also make the 366 Auto in a special .410 bore model. It has the same automatic features of the larger gauge 366 models and reloads 2 1/2 inch shells. Die sets not available separately.
 

All the features of the Famous 366 but with the Addition of Gas-Assisted indexing for the ultimate in smooth operation.
 

Plastic spring fingers force the case mouth open to prevent tipping and tearing of wads-a common cause of "blooper" loads. Spring fingers are standard on all Hornady loaders and fit wad guides of most other make.

Easily mounts your 366 above the counter, and gives you ready access to your finished shells. Set of four legs
 

The primer tuber filler drops primers in the tube and not on the floor. Ends the time-consuming job of inserting primers into the feed tubes of automatic priming systems.

Set of two baffles is included on the 366 Auto Shotshell Reloader.
 

Lets you set your primer seater to one adjustment, with no need to readjust the punch for different brands of hulls. Makes reloading faster and simpler. Can be retroffited to nearly any 366 Auto. Fits 12 and 20 gauge only.
 

Independently shut off the primer feed tube instead of removing it. Can be retrofitted to nearly any 366 Auto.